1.8T BFV files to BAM possible ?

Pages: [1]

« previous next »

Author

Topic: 1.8T BFV files to BAM possible ? (Read 8657 times)

Quba

Newbie

Karma: +0/-0
Offline

Offline

Posts: 1

	1.8T BFV files to BAM possible ? « on: October 21, 2011, 04:29:25 AM »

Hello

I have a question. Can I upload BFV files to BAM ecu ?
Motors are mechanically the same?
ECU is the same just a different program?

BIG thx.

My car is Audi S3 BAM


	Logged

TTQS

Guest

	Re: 1.8T BFV files to BAM possible ? « Reply #1 on: October 28, 2011, 12:17:54 PM »

No, because the map locations are all in different places and there's very little to be gained from 225 PS to 240 PS. If you wish to do it, then just locate the parameters that have changed from the BFV .bin file I uploaded and alter them yourself along with checksum correction, naturally. My guide illustrates all the main maps and compares the two files.

However, instead of going to all that trouble, you would be better off getting a circa 265 bhp Stage 2 tune put on your BAM ECU as I have done on my BFV ECU.

TTQS


« Last Edit: July 09, 2014, 10:39:02 AM by TTQS »	Logged

Swat Cat

Newbie

Karma: +2/-0
Offline

Offline

Posts: 8

	Re: 1.8T BFV files to BAM possible ? « Reply #2 on: November 23, 2011, 05:44:10 AM »

if you reprog eeprom with one from a BFV ecu ... should work...


	Logged

TTQS

Guest

	Re: 1.8T BFV files to BAM possible ? « Reply #3 on: November 23, 2011, 12:02:04 PM »

Quote from: Swat Cat on November 23, 2011, 05:44:10 AM

if you reprog eeprom with one from a BFV ecu ... should work...

Cool, but it sounds like a lot of trouble for 15 PS. Wouldn't the OP be better off putting his efforts into a good DIY Stage 2 remap?

We're not all Electronics or Software Engineers Wink

TTQS


« Last Edit: November 26, 2011, 03:14:12 AM by TTQS »	Logged

carlossus

Sr. Member

Karma: +38/-0
Offline

Offline

Posts: 394

Leon Curpa Stg1+

	Re: 1.8T BFV files to BAM possible ? « Reply #4 on: November 23, 2011, 02:02:31 PM »

Quote from: TTQS on November 23, 2011, 12:02:04 PM

Cool, but it sounds like a lot of trouble for 15 PS. Wouldn't the OP be better off putting his efforts into

I find the answer "because I can" often applies. Doing this would be fun for some of us.


	Logged

Swat Cat

Newbie

Karma: +2/-0
Offline

Offline

Posts: 8

	Re: 1.8T BFV files to BAM possible ? « Reply #5 on: November 23, 2011, 10:45:03 PM »

i`ve make transition from AMK to BAM just with flash

verry easy


	Logged

TTQS

Guest

	Re: 1.8T BFV files to BAM possible ? « Reply #6 on: July 09, 2014, 10:41:01 AM »

Has anybody successfully flashed this file to their ECU. I.e., does it work as posted and is it an authentic 240 PS map?

Audi TT 1.8T BFV 240 PS 8N0 906 018 CA 0261208086 375111.bin

Thanks.

TTQS


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 28, 2024, 05:43:23 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search