cawadany
Newbie
Karma: +1/-0
 Offline
Posts: 11
|
 |
« on: August 02, 2016, 01:58:20 AM »
|
|
|
Hi to all. I am trying to make a spare ECU for an Audi TT 2.0 TFSI med9.1. The original ECU is an 8J0907115N.
The car's owner doesn't want to open original ECU, so I found a bdm backup with same HW: 0261S02519 and SW: 1037387549, and I found an used ecu from VW Golf 5 2.0 TFSI med9.1. (1K0907115). With E2PA I did immo off in eprom of this bdm backup, changed the coding for dsg (backup is from manual car, this one has dsg) and wrote flash and eprom on ecu with bdm. The car starts but it doesn't accelerate and the idle is unstable. DTC stored is 17796/P1388/005000 - Control Module Malfunction - DBW Throttle Monitoring.
Is it possible that I have found an used faulty ecu? Or the problem can be immo off related?
|
|
|
|
|
Logged
|
|
|
|
|
nyet
|
|
« Reply #1 on: August 02, 2016, 05:23:49 PM »
|
|
|
Please don't crap into other people's threads. Thanks.
|
|
|
|
|
Logged
|
|
|
|
cawadany
Newbie
Karma: +1/-0
Offline
Posts: 11
|
|
« Reply #2 on: August 02, 2016, 11:13:25 PM »
|
|
|
Please don't crap into other people's threads. Thanks.
Sorry, but my problem is related to the same topic , also because I used the same software for immo off on med9.1. |
|
|
|
|
Logged
|
|
|
|
Placebo
Full Member
Karma: +3/-0
Offline
Posts: 108
|
|
« Reply #3 on: August 03, 2016, 05:25:52 AM »
|
|
|
. The car starts but it doesn't accelerate and the idle is unstable. DTC stored is 17796/P1388/005000 - Control Module Malfunction - DBW Throttle Monitoring.
Is it possible that I have found an used faulty ecu? Or the problem can be immo off related?
Interesting. Doing the same thing and I have the same issue. I have ordered a replacement ecu. If problem persists will let you know it wasn't the ecu. Sent from my iPhone using Tapatalk |
|
|
|
|
Logged
|
|
|
|
cawadany
Newbie
Karma: +1/-0
Offline
Posts: 11
|
|
« Reply #4 on: August 03, 2016, 08:48:05 AM »
|
|
|
Interesting. Doing the same thing and I have the same issue. I have ordered a replacement ecu. If problem persists will let you know it wasn't the ecu.
Sent from my iPhone using Tapatalk
Now I want to try solution immo off with eprom + flash, not only eprom. Did you try it? |
|
|
|
|
Logged
|
|
|
|
|
k0mpresd
|
|
« Reply #5 on: August 03, 2016, 09:09:42 AM »
|
|
|
i sent an ecu to a customer for an a3. customer complained of same issue, throttle issues.
swapped ecu, still problem persisted. ended up refunding customer since i was unsure of issue and i was not in person to diagnose properly.
i have never had a problem with med9 and throttle before but you seem to have similar problems as well.
|
|
|
|
|
Logged
|
|
|
|
cawadany
Newbie
Karma: +1/-0
Offline
Posts: 11
|
|
« Reply #6 on: August 03, 2016, 09:12:47 AM »
|
|
|
i sent an ecu to a customer for an a3. customer complained of same issue, throttle issues.
swapped ecu, still problem persisted. ended up refunding customer since i was unsure of issue and i was not in person to diagnose properly.
i have never had a problem with med9 and throttle before but you seem to have similar problems as well.
The ecus was immo-off? Or cloned? If immo-off, with only eprom or with eprom+flash? |
|
|
|
|
Logged
|
|
|
|
|
k0mpresd
|
|
« Reply #7 on: August 03, 2016, 09:16:50 AM »
|
|
|
off, e2p only.
|
|
|
|
|
Logged
|
|
|
|
cawadany
Newbie
Karma: +1/-0
Offline
Posts: 11
|
|
« Reply #8 on: August 03, 2016, 09:19:06 AM »
|
|
|
Same problem like mine, and I had immo-off only with e2p.... i think it's an immo-off related issue....
Now I don't have the car to test, but I will try with immo-off with e2p and flash.
|
|
|
|
|
Logged
|
|
|
|
Placebo
Full Member
Karma: +3/-0
Offline
Posts: 108
|
|
« Reply #9 on: August 03, 2016, 10:18:16 AM »
|
|
|
Replied to this in the other thread. Its not the ECU. I BDM cloned my old ECU to a this new ECU and the ECU works fine without throttle body errors. Mismatched eeproms maybe?
|
|
|
|
|
Logged
|
|
|
|
cawadany
Newbie
Karma: +1/-0
Offline
Posts: 11
|
|
« Reply #10 on: August 03, 2016, 10:38:56 AM »
|
|
|
I think immo-off only e2p solution it's not good for all med9.1 sw
|
|
|
|
|
Logged
|
|
|
|
|
k0mpresd
|
|
« Reply #11 on: August 03, 2016, 01:00:03 PM »
|
|
|
I think immo-off only e2p solution it's not good for all med9.1 sw
this seems to be the common factor between them all. if it was mismatched e2p, ecu would not boot. |
|
|
|
|
Logged
|
|
|
|
cawadany
Newbie
Karma: +1/-0
Offline
Posts: 11
|
|
« Reply #12 on: August 29, 2016, 11:05:24 PM »
|
|
|
I can confirm. It's an immo-off related problem. I tried with old solution (eep+flash) and the car works perfectly!
|
|
|
|
|
Logged
|
|
|
|
|
