Help on find PIN in immo2

Pages: 1 2 [3]

« previous next »

Author

Topic: Help on find PIN in immo2 (Read 21941 times)

febomax

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 42

	Re: Info on disable IMMO2 « Reply #30 on: August 26, 2016, 03:35:02 AM »

So if i don't undestand bad with IMMO off :
- the ECU and engine work correctly, whitout problems or shut down
- the vdo cluster itself complaints about no matching keys, so led blinking and errors in log of instrument channle. Is right ?

The same tha using a IMMO emulator ?
Is just to learn all info !

Thanks.


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Info on disable IMMO2 « Reply #31 on: August 26, 2016, 03:36:01 AM »

Where are you from? I've got a brand new (BX PN) IMMO2 FIS cluster. Don't need it; can ship.


	Logged

febomax

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 42

	Info about correct IMMO off file « Reply #32 on: August 26, 2016, 04:08:55 AM »

Hi,
i made this immo off manually, using info found in internet.
The 95040 made similar result BUT with lot different code...
Which is right Huh

?
THANKS !


	Logged

davepii

Newbie

Karma: +0/-0
Offline

Offline

Posts: 1

	Re: Help on find PIN in immo2 « Reply #33 on: October 05, 2016, 01:59:23 PM »

Quote from: febomax on August 23, 2016, 07:15:22 AM

Hi, i'm trying to study the immo2 of my car (Italy A3 1.8 Turbo 4 of 1999) because i need to swap instrument cluster, do to led problems. I 'm trying to retrive PIN from dashboard using Vag Commander 2.4. It reads the instrument eprom that i saved but givea a worng pin, i tried to log-in wit vag-com but it is refused. It gives 6392 as wrong login. I tried to change km of dashboard and it has worked without problem, so the cable and the software seems ok.
I read that the PIN is visible in hexdump of the IMMO2 eprom but i don't know where.
Is possible any help !
Thanks a lot to all !

pin for this dump = 06396


	Logged

febomax

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 42

	Re: Help on find PIN in immo2 « Reply #34 on: October 07, 2016, 08:44:31 AM »

Quote from: davepii on October 05, 2016, 01:59:23 PM

pin for this dump = 06396

I repost my "old" explanation og the problem...

Yes , that is!
Smiley
Where is in the hex DUMP ?
Just to understand ...
I put a note that i found in other forum, very IMPORTANT : i made a wrong login (i put all 0000 just to try) and after tried with the correct pin. Login FAIL again. So i supposed that pin was wrong. ERROR : the pin is correct !
AFTER A FAILED LOGIN YOU MUST LEAVE THE IGNITION ON FOR ABOUT 15 minutes to "reset" the instrument module !!!!
IGNITION ON !
Vag-com was right, i only want to understand in dump for my satisfaction...
Thanks !!!!


	Logged

macxxx

Sr. Member

Karma: +30/-1
Offline

Offline

Posts: 498

	Re: « Reply #35 on: October 07, 2016, 11:38:42 AM »

Search for FC18


	Logged

Pages: 1 2 [3]

« previous next »

Jump to:

Navigation

Personal Tools

November 30, 2024, 09:48:18 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?