Pages: [1]
Author Topic: Bosch HFM5 MAT and Baro Corrections  (Read 4698 times)
jacky4566
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1


« on: August 25, 2016, 09:40:40 PM »

Hi guys,

Would anyone be kind enough to send me the Mass Air Temp and Barometric corrections used on a vehicle equipped with a Bosch HFM5 maf sensor. This should be common on most VW/ Audi and specifically 2002 Beetle where mine came from. I am trying to use it on a completely different project (megaquirt) and I would like a starting point for these corrections.

I really did try to learn TunerPro but i just couldn't find what i was looking for. Hopefully someone can find this MUCH faster than me.

-Jackson
Logged
RBPE
Sr. Member
****

Karma: +40/-5
Offline Offline

Posts: 394



« Reply #1 on: November 17, 2016, 12:39:56 PM »

Some general Motronic "air" maps for HFM 5 series are attached.

Feel free to elaborate in Motronic form.
« Last Edit: November 17, 2016, 12:59:35 PM by RBPE » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.025 seconds with 16 queries. (Pretty URLs adds 0.005s, 0q)