Pages: [1]
Author Topic: me3.8 Golf AGU rescale maf and injectors  (Read 8036 times)
renegade978
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 13


« on: August 27, 2016, 03:00:09 AM »

Agu golf has S3 MAF and saab red top injectors (0280150431) Need someone to scale these in for me.

Please PM ME
Logged
sam
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 11


« Reply #1 on: September 01, 2016, 08:39:28 AM »

does s3 maf not have different plug on it? i ran a vr6 maf and c20let injectors on my aeb, with agu ecu (basically the same engine) and it ran great, no scaling required with a t28 turbo, boost upto 1bar (using mbc) standard 150bhp map/tune made 275bhp 310ftlb at a rolling road day and fueling wasnt bad at all (had an aem widband gauge to keep an eye on things)
Logged
eliotroyano
Hero Member
*****

Karma: +32/-2
Offline Offline

Posts: 656


« Reply #2 on: September 02, 2016, 12:36:09 PM »

Agu golf has S3 MAF and saab red top injectors (0280150431) Need someone to scale these in for me.
Please PM ME

1.8T uses HFM2 MAF then are you using HFM5 complete MAF? or just move sensor for one to other? In fact housings has different sensors orientation. There some math aprox that can help for that, in terms of MAF values extrapolation. But last word will be done by trial and error. Some good info about that are in this forums.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)