Pages: [1]
Author Topic: ETK7.1 connect to ME7.1.1 ECU Board  (Read 2773 times)

Karma: +1/-0
Offline Offline

Posts: 17

« on: September 19, 2016, 12:04:33 PM »

Hey Guys,
does anybody use an ETK7.1 with an ME7.1.1 (6 Cly.)?

I would like to fit an ETK7.1 to my ME7.1.1 ECU Mainboard and need to know the pin assignment between the ECU Board and the ERNI plug socket. (connection between the ETK and the ECU Board)

It would be very helpful if someone can send me a documentation or some pictures from the ECU Board.
Thanks  Smiley
Hero Member

Karma: +42/-35
Offline Offline

Posts: 1854

« Reply #1 on: September 19, 2016, 12:13:42 PM »

Is it not in the original documentation?

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."

Karma: +0/-1
Offline Offline

Posts: 6

« Reply #2 on: October 04, 2016, 03:12:40 AM »

can you help me i search this board for a while.
Where do you get this board ?
i have the information and some Pics how the board is mounted please contact me.
best regards chris
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0s, 0q)