NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Help - Errors in 95040.bin file pulled from APR tuned ECU
Pages: [1]
« previous next »
Author Topic: Help - Errors in 95040.bin file pulled from APR tuned ECU  (Read 4748 times)
TAZ
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« on: October 03, 2016, 09:56:14 PM »
So I managed to read the 95040 eeprom using ME7_95040 version 1.31 using Ross-Tech HEX-USB cable with VCP driver and there are errors in the file.

Where the immobilizer should read 01 or 02, there is 04, and where the SKC should be is just FF FF

Is this something that APR has done (i.e. as a result of using their Immobilizer cloning tool)?

Trying to get SKC so I can add new keys and disable a key I lost.

Some additional information; 2001 Audi A4 1.8T, ECU 4b0906018m, VCDS does not show anything in the Extra field where the immobilizer ID should be.
« Last Edit: October 03, 2016, 10:12:20 PM by TAZ » Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802
« Reply #1 on: October 03, 2016, 11:50:57 PM »
Read cluster e2p
Logged
Giving your mom a tuneup
TAZ
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #2 on: October 04, 2016, 07:49:58 AM »
So I take it I need another bit of software to do this.  Most threads point to one programme but there also seems to be a lot of horror stories associated with it and bricking the cluster.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #3 on: October 04, 2016, 08:48:46 AM »
Quote from: TAZ on October 04, 2016, 07:49:58 AM
So I take it I need another bit of software to do this.  Most threads point to one programme but there also seems to be a lot of horror stories associated with it and bricking the cluster.

Yes. There are a handful of tools that can read the cluster. They are different than the tools used to read the e2p in the ecu.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
TAZ
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 4
« Reply #4 on: October 15, 2016, 01:06:44 PM »
Okay, so I got VAG Commander 3.6 and was able to read both the immobiliser and the ECU files.  The ECU file is the same as the 95040 file that I pulled previously with FF FF at the SKC addresses.  The immobiliser file reports the SKC as 0. 

Do I need to get the APR tune removed to do get the SKC?
Logged
h100vw
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34
« Reply #5 on: October 20, 2016, 08:46:29 PM »
I can't directly answer your question but an experience I have had recently might provide some insights to work on.

I was a helping a friend sell a tuned APR ECU from a Polo GTI in Australia. I had swapped a few immo chips around in the past to achieve this. Although this was the first APR tuned one.

ECU1 APR ECU2 VW

Swapping the immo chip wasn't a workable solution. The ECU1 wouldn't run with the VW immo. ECU2 was ok with APR immo.

I kind of twigged that the APR tune was tied to the VIN/immo from the original car. So I cloned the immo chip from, the APR ECU and defeated the immo in it to work with the new guys car.

Doesn't fix the OPs problem but indicates that APR are playing games in there!.

G
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 09:40:44 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 18 queries. (Pretty URLs adds 0s, 0q)