NefMoto > General > General Discussion > WMI nozzle size suggestions for the 2.7T
Pages: [1]
« previous next »
Author Topic: WMI nozzle size suggestions for the 2.7T  (Read 7533 times)
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« on: October 08, 2016, 10:29:41 AM »
I'm going to be installing 3-4 systems on 2.7t's this upcoming month. One will be stock (reflashed), 2 will be using Tial 605's (28 psi), and one with I think 770's. Looking for some real world system nozzle sizes (in cc if possible) for these different setups. We will be using Aquamist kits. The calculators I've seen suggest different numbers, so I figured I'd ask what people are using, and had success with. Thanks, guys.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Dave9n3
Sr. Member
****

Karma: +27/-0
Offline Offline

Posts: 289
« Reply #1 on: October 25, 2016, 04:45:36 AM »
Had hoped someone would have replied to this by now lol. I don't know much so hopefully this reply isn't going to be useless to you but I was under the impression you wanted about 10-20% water methanol injected of the overall injector flow in cc/min for all cylinders so. for mine i run 317cc injectors x 4 cylinders = 1268cc/min then 10% of that is obviously 126.8cc/min and 20% would be 253.6cc/min. I then selected a nozzle of 250cc/min @100 psi from devilsown.

I cant remember where I found that information but I'll do some digging when I'm home from work to try and find it. Sorry if that was totally useless lol,
Logged
Dave9n3
Sr. Member
****

Karma: +27/-0
Offline Offline

Posts: 289
« Reply #2 on: October 25, 2016, 10:19:11 AM »
http://howertonengineering.com/calculating-jetting/ found it. hopefully that is useful for you.
Logged
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #3 on: October 26, 2016, 11:18:50 AM »
Quote from: Dave9n3 on October 25, 2016, 10:19:11 AM
http://howertonengineering.com/calculating-jetting/ found it. hopefully that is useful for you.

Thanks, Dave.
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
prj
Hero Member
*****

Karma: +1072/-481
Offline Offline

Posts: 6037
« Reply #4 on: October 26, 2016, 12:25:35 PM »
Don't use calculator.

K03's - 360hp crank - dual 0.8mm
PJ K04's - 530hp crank - dual 0.9mm
600-620hp crank - dual 1.0mm
Anything over 700hp crank - dual 1.2mm
Logged
PM's will not be answered, so don't even try.
Log your car properly - WinOLS database - Tools/patches
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024
« Reply #5 on: October 26, 2016, 12:31:57 PM »
Quote from: prj on October 26, 2016, 12:25:35 PM
Don't use calculator.

K03's - 360hp crank - dual 0.8mm
PJ K04's - 530hp crank - dual 0.9mm
600-620hp crank - dual 1.0mm
Anything over 700hp crank - dual 1.2mm

Thanks. The info I was looking for.  Smiley
Logged
"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 27, 2024, 05:12:20 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)