Pages: 1 [2] 3
Author Topic: NefMoto Data Logger  (Read 28670 times)
cactusgreens4
Full Member
***

Karma: +2/-0
Offline Offline

Posts: 110


« Reply #15 on: October 11, 2012, 12:28:10 PM »

like one from ecux? because I tried that and it didnt work. I also tried using my bin file loaded on my ecu, which also didnt work. I even tried to read my ecu file using nefmoto... which surprise surprise that didnt work either. I guess what I need is someone to spoon feed me directions on how to create one of these ecu files. I have stezi's me7logger but cant really fugue out how to use that either... if that is what you mean by using me7logger. unless im supposed to use one of the definition files included with his logger, which I also tried and had no luck with... btw I'm using an m box file flashed to an a box ecu. thanks
Logged
phila_dot
Hero Member
*****

Karma: +156/-11
Offline Offline

Posts: 1700


« Reply #16 on: October 11, 2012, 12:49:35 PM »

ME7Logger comes with a utility called ME7Info the reads a defined bin file and produces a *.ecu file containing RAM variables.

You need to use this *.ecu file created by ME7Info with NefMoto Logger or ME7Logger.
Logged
Bische
Sr. Member
****

Karma: +23/-0
Offline Offline

Posts: 393



« Reply #17 on: October 11, 2012, 10:49:06 PM »

How many have got Neflogger to work? Does it only work on some ECUs?

Im still getting the aftermarket security access denied message, I have tried change around some settings with no luck. I dont understand why this happens as my file is tuned stock file and I dont even know how enable security stuff..

I can log just fine with setzi's, never had a single problem, but for some calibration I feel I could save some time if I could read the data live on the screen instead of needing to park the car and open the log to check.

Also would be a million times easier to log specific ranges of like IPW's and WGDC's if I could see them live on the screen where exactly im driving in those ranges. Now it more a guessstimate to try hit specific ranges while logging..
Logged

vtraudt
Sr. Member
****

Karma: +3/-0
Offline Offline

Posts: 285


WWW
« Reply #18 on: January 11, 2013, 05:49:07 AM »

Installed NefMoto on a dedicated (XP) laptop and want to start using the logger.
Before I can start, I read that I need a file that contains the variables I want to log.
I want to start with my 2002 Allroad 2.7T 6 spd manual (was 4Z7 907 551 L, stage 2 flashed now reads: 8D0 907 551 M)/

How can I create the required file, or where can I find it?
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
ddillenger
Hero Member
*****

Karma: +616/-19
Offline Offline

Posts: 5647


« Reply #19 on: January 11, 2013, 09:47:15 AM »

setzis logger (me7logger) can create it, I'll shoot you a few links via email.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vtraudt
Sr. Member
****

Karma: +3/-0
Offline Offline

Posts: 285


WWW
« Reply #20 on: January 11, 2013, 10:37:29 AM »

setzis logger (me7logger) can create it, I'll shoot you a few links via email.

So I need Me7logger (setzi) to create the file, so that I can log with nefmoto logger?

Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
ddillenger
Hero Member
*****

Karma: +616/-19
Offline Offline

Posts: 5647


« Reply #21 on: January 11, 2013, 10:53:28 AM »

Here you are.
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
kelesha
Full Member
***

Karma: +7/-1
Offline Offline

Posts: 61


« Reply #22 on: January 11, 2013, 02:36:55 PM »

Seems very stupid question but.......is there any way to open NefMoto log files with Excel or ECUxPlot ?

Today i test this software for first time and i reach 50 samples per sec easy, on same ECU with VCDS in Turbo mode speed is 3.3 samples per sec with 1 read block (4 values) only.
Logged
vtraudt
Sr. Member
****

Karma: +3/-0
Offline Offline

Posts: 285


WWW
« Reply #23 on: January 22, 2013, 08:43:29 AM »

I am still struggling to use the Data Logger.
I want to log the following (2002 Allroad TIP) stock ECU:
4Z7 907 551 M

1) what files/definitions (xml, else) do I need?
2) where can I get them from, and how?

I need to get this done today, so any help would be appreciated.

If someone could post the required files, or email to:

regulatorfix@gmail.com


Thanks a bundle!
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
vtraudt
Sr. Member
****

Karma: +3/-0
Offline Offline

Posts: 285


WWW
« Reply #24 on: January 22, 2013, 12:13:43 PM »

I am still struggling to use the Data Logger.
I want to log the following (2002 Allroad TIP) stock ECU:
4Z7 907 551 M

1) what files/definitions (xml, else) do I need?
2) where can I get them from, and how?


I found this file; can I use it to log the above ECU?
Are other files needed?

Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
ddillenger
Hero Member
*****

Karma: +616/-19
Offline Offline

Posts: 5647


« Reply #25 on: January 22, 2013, 12:45:59 PM »

Volker-you have to create your own .ecu file based on the bin that's loaded into your ecu. I emailed you a quick "how to".

DD
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
vtraudt
Sr. Member
****

Karma: +3/-0
Offline Offline

Posts: 285


WWW
« Reply #26 on: January 23, 2013, 08:24:55 AM »

Volker-you have to create your own .ecu file based on the bin that's loaded into your ecu. I emailed you a quick "how to".

DD

DD, thanks for all the help. Managed to create the ECU file. Managed to run the first logs (wayy to much junk logged; need to become more disciplined to avoid the huge data mass). Now trying to get ECUxPlot to work (win7-64). Seemed to install ok running the setup as administrator/xp mode. But any csv file i load only shows empty graphs.
Not sure what is wrong.
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
vtraudt
Sr. Member
****

Karma: +3/-0
Offline Offline

Posts: 285


WWW
« Reply #27 on: January 23, 2013, 10:21:49 AM »

What is the most efficient way to generate all required files for the various cars/ecus/tunes I am logging, and have them 'at my fingertips' ready for logging. Including the variations of the selected logging variables.

Allroad tip stock
Allroad tip stage 1 (S4 flash)
Allroad 6 spd stock
Allroad 6 spd stage 1 (S4 flashed)
Allroad 6 spd stage 2 (S4 flashed)

Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
vtraudt
Sr. Member
****

Karma: +3/-0
Offline Offline

Posts: 285


WWW
« Reply #28 on: January 27, 2013, 12:03:44 PM »

Could someone put a short 'how to' together describing the entire logging process with NefMoto logger (list of needed programs, software required to create needed files, list of needed files, creating/saving parameter lists, etc.), and results display (ECUxPlot)?

I am still struggling to get a log done.
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
nyet
Administrator
Hero Member
*****

Karma: +398/-47
Offline Offline

Posts: 9062


WWW
« Reply #29 on: January 27, 2013, 12:36:26 PM »

You have everything you need already.

If you want, dont bother with the Nef logger, ME7L works just fine.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
Pages: 1 [2] 3
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)