Pages: [1]
Author Topic: 2.7 biturbo 512kb ecu  (Read 7091 times)
maluch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« on: October 23, 2016, 11:40:21 AM »

Hello.
I have a A6 with the AJK 2.7tt engine with ecu 4B0907551E and auto. But the ecu is fried, and I have to get a used one.
Can I buy a 1mb from a another A6 2.7tt and use that, the deal here is that the engine is going in to a another car, with manual gearbox and no abs/esp.

Thanks, Joakim
Logged
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 660



« Reply #1 on: October 23, 2016, 12:04:14 PM »

Yes but you need to program ecu correctly for esp ect. Also you need to know if your maf is and program ecu accordingly. I might be missing a couple things but this should get you up and running.
Logged
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 660



« Reply #2 on: October 23, 2016, 12:04:51 PM »

Also your topic says 512? You're a 1mb  file
Logged
maluch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #3 on: October 24, 2016, 09:58:32 AM »

ok, thanks.
but according to this page http://nyet.org/cars/files/stock/part-numbers.txt it is a 512 ecu, and it have a am29f400bt installed  in it.

I have bosch MAF. is it possible also to use another bin file from another ecu? and s4 file?

thanks
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #4 on: October 24, 2016, 10:49:39 AM »

You can use any 512k file in that ecu, or buy another ecu (512k or 1mb) and flash it with your ORI or your ORI doubled up to 1m

Or run a bosch file (1m) from another ecu

Or run a hitachi file (1m) from another ecu and copy the MAF maps over.

you will likely need to perform an engine coding via VCDS unless you match ecu/file 1:1
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 660



« Reply #5 on: October 24, 2016, 05:01:44 PM »

Didn't know there was a 2.7t with a 512mb? Is that only in Europe?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #6 on: October 24, 2016, 06:18:40 PM »

Didn't know there was a 2.7t with a 512mb? Is that only in Europe?

Did you read this, linked above?
http://nyet.org/cars/files/stock/part-numbers.txt
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 660



« Reply #7 on: October 24, 2016, 06:31:17 PM »

?
« Last Edit: October 24, 2016, 08:00:30 PM by ktm733 » Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #8 on: October 24, 2016, 07:30:42 PM »

Nope, nyet... Are you an actual human being?

DUDE it is fucking linked a few messages up.

ok, thanks.
but according to this page http://nyet.org/cars/files/stock/part-numbers.txt it is a 512 ecu, and it have a am29f400bt installed  in it.

I have bosch MAF. is it possible also to use another bin file from another ecu? and s4 file?

thanks
for fucks sake I swear to god you frustrate me to no end.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 660



« Reply #9 on: October 24, 2016, 07:59:13 PM »

You know I've already read through the list right? Humor wasn't sensed I guess.
Logged
maluch
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 17


« Reply #10 on: October 25, 2016, 12:20:53 AM »

okay. Thank you! Will check ebay for a spare one then! Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0s, 0q)