NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > no ignition, ecu broken
Pages: [1]
« previous next »
Author Topic: no ignition, ecu broken  (Read 4752 times)
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600
« on: October 23, 2016, 11:45:46 PM »
Hi,

there was a thread once.....
Someone managed to swap a broken part inside the ecu to have the ecu working again.
I have a 032HN ecu without ignition / coil pack drivers.

Can someone remember the thread name or something?
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #1 on: October 24, 2016, 06:41:25 AM »
Quote from: aef on October 23, 2016, 11:45:46 PM
Hi,

there was a thread once.....
Someone managed to swap a broken part inside the ecu to have the ecu working again.
I have a 032HN ecu without ignition / coil pack drivers.

Can someone remember the thread name or something?

Maybe this info --> http://nefariousmotorsports.com/forum/index.php?topic=10619.msg92066#msg92066 can help you  Wink Wink Wink
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600
« Reply #2 on: October 28, 2016, 06:43:16 AM »
Thanks, i have the ecu on my desk.

It looks fine from the inside. nothing burnt or something.
Will try to measure and compare the 30397 with another ecu.

regards
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #3 on: October 28, 2016, 10:20:24 AM »
Quote from: aef on October 28, 2016, 06:43:16 AM
Thanks, i have the ecu on my desk.
It looks fine from the inside. nothing burnt or something.
Will try to measure and compare the 30397 with another ecu.
regards

Try to check power diodes first? check that whole ECU, VCC line around ICs is energized. That ECU communicates with VCDS under diagnostic port?
Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1600
« Reply #4 on: October 29, 2016, 12:07:38 AM »
Yes is can read/write with different tools, vcds works fine, no dts with ecu in the car. Only problem is that there is no ignition.
Tried different ecus and this ecu in different cars. I dont really know what to check next.
Logged
eliotroyano
Hero Member
*****

Karma: +48/-8
Offline Offline

Posts: 825
« Reply #5 on: October 29, 2016, 07:42:24 PM »
Quote from: aef on October 29, 2016, 12:07:38 AM
Yes is can read/write with different tools, vcds works fine, no dts with ecu in the car. Only problem is that there is no ignition.
Tried different ecus and this ecu in different cars. I dont really know what to check next.

I will try changing Bosch 30397 IC.
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 23, 2024, 09:11:44 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 18 queries. (Pretty URLs adds 0s, 0q)