NefMoto > Technical > Tuning > KRKATE TTRS/RS Please
Pages: 1 2 [3]
« previous next »
Author Topic: KRKATE TTRS/RS Please  (Read 25173 times)
turbo944s2
Full Member
***

Karma: +1/-0
Offline Offline

Posts: 59
« Reply #30 on: March 07, 2017, 06:06:00 AM »
Quote from: gman86 on March 07, 2017, 04:04:04 AM
If you're getting smoke, try knocking 40-60 degrees of injection angle off low load areas. Are your fuel trims pegged -25%?

Hey Gman,

Are you talking about the end of injection angle or the beginning angle?
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705
« Reply #31 on: March 07, 2017, 10:37:09 AM »
Beginning. I'd take a screenshot but I'm 35,000 feet above Budapest just now and my data allowance is limited Smiley
Logged
teobolo
Full Member
***

Karma: +24/-6
Offline Offline

Posts: 112
« Reply #32 on: March 07, 2017, 02:37:15 PM »
Since know i have not touch the ignition angle tables...I will change them as you described and i will report back .

No i do not get -25% at low / mid throttle values...
« Last Edit: March 07, 2017, 02:52:38 PM by teobolo » Logged
teobolo
Full Member
***

Karma: +24/-6
Offline Offline

Posts: 112
« Reply #33 on: March 16, 2017, 01:33:53 AM »
Quote from: gman86 on March 07, 2017, 10:37:09 AM
Beginning. I'd take a screenshot but I'm 35,000 feet above Budapest just now and my data allowance is limited Smiley

when you are saying begining angle you mean KFWBHO1SLE & KFWBHO1SWE   or KFWBHK2S1 ?
Logged
Khendal
Full Member
***

Karma: +9/-8
Offline Offline

Posts: 226
« Reply #34 on: August 10, 2017, 02:36:08 AM »
Anyone of you have KRKATE formula to calculate ? Wink
Logged
purepower
Newbie
*

Karma: +5/-1
Offline Offline

Posts: 22
« Reply #35 on: August 20, 2017, 07:03:15 AM »
A nice KRKTE calculator from a NefMoto user Wink
Logged
PurePowerPerformance
Pr3muToS
Full Member
***

Karma: +1/-4
Offline Offline

Posts: 65
« Reply #36 on: August 26, 2017, 07:57:42 AM »
Quote from: littco on October 26, 2016, 12:44:13 PM

Thanks , I've looked and all I can see is a bracket type fitting no.24 where as in the picture you see billet collars


wheres the aluminium ring from?

I bought also rs3 injectors for fitting inmy s3 ea113.. but there are no aluminum rings with... is there a part nr?
Which injectors rep set i need? from s3 or rs3?
Logged
purepower
Newbie
*

Karma: +5/-1
Offline Offline

Posts: 22
« Reply #37 on: September 02, 2017, 07:31:04 AM »
I'm in the same situation.
I've bought injectors and I can't find that alluminium collar billets.
Do you have some news?
Logged
PurePowerPerformance
Powerchips
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #38 on: October 08, 2018, 03:54:44 PM »
Anyone source some allu collars?
Logged
Pr3muToS
Full Member
***

Karma: +1/-4
Offline Offline

Posts: 65
« Reply #39 on: October 09, 2018, 05:27:18 AM »
Quote from: Powerchips on October 08, 2018, 03:54:44 PM
Anyone source some allu collars?

you do not need them, can buy from vw, are plastic.
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283
« Reply #40 on: December 05, 2018, 05:22:29 AM »
plastic ?
any vag number ?
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283
« Reply #41 on: December 05, 2018, 05:47:10 AM »

ok i found
Logged
jesusito_fr
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 1
« Reply #42 on: July 08, 2020, 07:49:49 AM »
Quote from: sonique on December 05, 2018, 05:47:10 AM
ok i found

Hi,

what is ref # for them?

Does anybody know # for wiring adapters suitable for RS3's on Golf 6R?
Logged
Pages: 1 2 [3]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 16, 2024, 02:16:44 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 16 queries. (Pretty URLs adds 0s, 0q)