Pages: [1] 2
Author Topic: uushk_w for 4Z7907551R (BEL)  (Read 14635 times)
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« on: October 27, 2016, 12:08:55 PM »

Does anyone have the memory address for uushk_w in 4Z7907551R so I can log my wideband with full resolution through the ecu?

I'd post the ori bin, but it's a very common file and I don't want to unnecessarily take up server space.
Logged
corradovolksb
Full Member
***

Karma: +18/-1
Offline Offline

Posts: 112



« Reply #1 on: October 27, 2016, 02:04:55 PM »

If I remember correctly your car uses wideband o2 sensors so logging your front o2s and requested and current AFR will be an accurate wideband reading.
Logged

2000 Nogaro blue S4 Stage 2. VAG for life.
vwaudiguy
Hero Member
*****

Karma: +53/-37
Offline Offline

Posts: 2024



« Reply #2 on: October 27, 2016, 02:09:29 PM »

.
« Last Edit: October 27, 2016, 02:16:04 PM by vwaudiguy » Logged

"If you have a chinese turbo, that you are worried is going to blow up when you floor it, then LOL."
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #3 on: October 27, 2016, 03:18:02 PM »

here you go: http://nefariousmotorsports.com/forum/index.php?topic=10094.0title=
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #4 on: October 27, 2016, 03:30:54 PM »

If I remember correctly your car uses wideband o2 sensors so logging your front o2s and requested and current AFR will be an accurate wideband reading.

nope. narrowband
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #5 on: October 27, 2016, 03:31:30 PM »


link to how to install nefmoto?  Smiley  thanks
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #6 on: October 27, 2016, 03:32:51 PM »

found my answer

/UMP, {}, uushk2_w, {ADC-Spannung Lambdasonde hinter Katalysator Bank2 (Word)}, $380B26, 514, 338, spg_uw_q0p00488, 3, $FFFF, K;

/UMP, {}, uushk_w, {ADC-Spannung Lambdasonde hinter Katalysator (Word)}, $380B28, 514, 338, spg_uw_q0p00488, 3, $FFFF, K;
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #7 on: October 27, 2016, 03:34:43 PM »

I'm confused, if you are using the ECU, you have a wideband, if you aren't, how is the location valid?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #8 on: October 27, 2016, 03:42:57 PM »

nyet, 551R is a narrowband ecu.  I have an innovate lc-2 that I am attempting to log by running the signal through the rear o2 sensor (rear o2's coded out)

You can't just log the normal o2 voltage variables (ushk/2, 8 bit) as they are capped at ~1.3volts.   I need full 0-5 voltage resolution to log my wideband, and uushk/2_w (16 bit) will give me that resolution... at least that's what I think based on other examples.

Will report back.
« Last Edit: October 27, 2016, 05:26:25 PM by SB_GLI » Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #9 on: October 27, 2016, 06:00:05 PM »

I can now log a 0-5v signal through uushk_w, instead of ushk. 

ushk gave only a 0-1.3v resolution and required scaling the output of the lm-2, resulting in inconsistent samples.  It was good enough to let you know if you were rich or lean, but not a very good indicator of actual lambda.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12232


WWW
« Reply #10 on: October 28, 2016, 01:54:35 AM »

ah i understand. I thought the output impedance wasn't low enough to drive those narrow band inputs?
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #11 on: October 28, 2016, 04:50:56 AM »

link to how to install nefmoto?  Smiley  thanks

no, but if you download the folder there is your ecu file with what you need Smiley

I see you figured that out
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #12 on: October 28, 2016, 05:09:10 AM »

no, but if you download the folder there is your ecu file with what you need Smiley

I see you figured that out

geez, I skimmed over that way too fast Smiley  Thanks for the link.
Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #13 on: October 28, 2016, 08:15:20 AM »

For the one millionth time. THERE IS NO 2.7TT WITH WIDEBAND.

Thanks.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #14 on: October 28, 2016, 08:21:55 AM »

For the one millionth time. THERE IS NO 2.7TT WITH WIDEBAND.

1,000,000 + 1.  Smiley
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)