NefMoto > Technical > NefMoto Software > Start diagnostic session failed, ECU reports conditions HELPS!!
Pages: [1]
« previous next »
Author Topic: Start diagnostic session failed, ECU reports conditions HELPS!!  (Read 8619 times)
Cablekid
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13
« on: November 13, 2011, 04:05:28 PM »
It can read the ECU INFO but then it cant validate the memory Sad HELP!
The ECU IS in the CAR with the car ignition on. The engine is not running
1999 AUDI TT 1.8T USA

Quote
13/Nov/2011 03:00:52.450: USER: Disabling Windows sleep mode.
13/Nov/2011 03:00:52.463: USER: Reading ECU info.
13/Nov/2011 03:00:52.483: USER: Reading ECU identification option: ECUIdentificationScalingTable
13/Nov/2011 03:00:52.489: LOG: Sent message with service ID ReadECUIdentification
13/Nov/2011 03:00:52.550: LOG: Received message with service ID ReadECUIdentificationPositiveResponse
13/Nov/2011 03:00:52.557: USER: Successfully read ECU identification information
13/Nov/2011 03:00:52.590: USER: Reading ECU identification option: systemSupplierECUHardwareNumber
13/Nov/2011 03:00:52.601: LOG: Sent message with service ID ReadECUIdentification
13/Nov/2011 03:00:52.648: LOG: Received message with service ID ReadECUIdentificationPositiveResponse
13/Nov/2011 03:00:52.658: USER: Read ECU Identification systemSupplierECUHardwareNumber: 0261206582,
13/Nov/2011 03:00:52.669: USER: Successfully read ECU identification information
13/Nov/2011 03:00:52.684: USER: Reading ECU identification option: systemSupplierECUSoftwareNumber
13/Nov/2011 03:00:52.687: LOG: Sent message with service ID ReadECUIdentification
13/Nov/2011 03:00:52.738: LOG: Received message with service ID ReadECUIdentificationPositiveResponse
13/Nov/2011 03:00:52.741: USER: Read ECU Identification systemSupplierECUSoftwareNumber: 1037352144,
13/Nov/2011 03:00:52.747: USER: Successfully read ECU identification information
13/Nov/2011 03:00:52.759: USER: Reading ECU identification option: calibrationDate
13/Nov/2011 03:00:52.762: LOG: Sent message with service ID ReadECUIdentification
13/Nov/2011 03:00:52.852: LOG: Received message with service ID ReadECUIdentificationPositiveResponse
13/Nov/2011 03:00:52.855: USER: Read ECU Identification calibrationDate: 8N0906018S  , 0003, 0x000019C8, 0x00000000, 0x04D4, 1.8L R4/5VT    ,      ,
13/Nov/2011 03:00:52.862: USER: Successfully read ECU identification information
13/Nov/2011 03:00:52.880: USER: Reading ECU identification option: calibrationEquipmentSoftwareNumber
13/Nov/2011 03:00:52.887: LOG: Sent message with service ID ReadECUIdentification
13/Nov/2011 03:00:52.932: LOG: Received message with service ID ReadECUIdentificationPositiveResponse
13/Nov/2011 03:00:52.936: USER: Read ECU Identification calibrationEquipmentSoftwareNumber: 0x00000000,
13/Nov/2011 03:00:52.941: USER: Successfully read ECU identification information
13/Nov/2011 03:00:52.954: USER: 100% complete.
13/Nov/2011 03:00:52.962: USER: Reading ECU info succeeded.
13/Nov/2011 03:00:54.704: USER: Restoring Windows sleep mode.
13/Nov/2011 03:00:55.389: LOG: Sent message with service ID TesterPresent
13/Nov/2011 03:00:55.435: LOG: Received message with service ID TesterPresentPositiveReponse
13/Nov/2011 03:00:57.893: LOG: Sent message with service ID TesterPresent
13/Nov/2011 03:00:57.935: LOG: Received message with service ID TesterPresentPositiveReponse
13/Nov/2011 03:00:58.152: USER: Disabling Windows sleep mode.
13/Nov/2011 03:00:58.167: USER: Validating memory layout.
13/Nov/2011 03:00:58.180: USER: Reading ECU identification option: calibrationEquipmentSoftwareNumber
13/Nov/2011 03:00:58.183: LOG: Sent message with service ID ReadECUIdentification
13/Nov/2011 03:00:58.229: LOG: Received message with service ID ReadECUIdentificationPositiveResponse
13/Nov/2011 03:00:58.242: USER: Read ECU Identification calibrationEquipmentSoftwareNumber: 0x00000000,
13/Nov/2011 03:00:58.268: USER: Successfully read ECU identification information
13/Nov/2011 03:00:58.293: USER: ECU reports programming session preconditions have been met.
13/Nov/2011 03:00:58.301: USER: Negotiating communication timings.
13/Nov/2011 03:00:58.312: LOG: Reading current communication timings.
13/Nov/2011 03:00:58.327: LOG: Sent message with service ID AccessTimingParameters
13/Nov/2011 03:00:58.379: LOG: Received message with service ID AccessTimingParametersPositiveResponse
13/Nov/2011 03:00:58.383: LOG: Set timing parameters to new values.
13/Nov/2011 03:00:58.388: LOG: Reading communication timing defaults.
13/Nov/2011 03:00:58.446: LOG: Sent message with service ID AccessTimingParameters
13/Nov/2011 03:00:58.488: LOG: Received message with service ID AccessTimingParametersPositiveResponse
13/Nov/2011 03:00:58.492: LOG: Reading current communication timings.
13/Nov/2011 03:00:58.553: LOG: Sent message with service ID AccessTimingParameters
13/Nov/2011 03:00:58.599: LOG: Received message with service ID AccessTimingParametersPositiveResponse
13/Nov/2011 03:00:58.602: USER: Successfully changed to new communication timings.
13/Nov/2011 03:00:58.611: USER: Requesting security access.
13/Nov/2011 03:00:58.650: LOG: Sent message with service ID SecurityAccess
13/Nov/2011 03:00:58.687: LOG: Received message with service ID NegativeResponse
13/Nov/2011 03:00:58.692: LOG: Received negative response for service ID: SecurityAccess, with response code: ServiceNotSupported
13/Nov/2011 03:00:58.695: USER: ECU reports that security access is not supported.
13/Nov/2011 03:00:58.704: LOG: Starting diagnostic session type: ProgrammingSession
13/Nov/2011 03:00:58.716: USER: Starting diagnostic session.
13/Nov/2011 03:00:58.749: LOG: Sent message with service ID StartDiagnosticSession
13/Nov/2011 03:00:58.817: LOG: Received message with service ID NegativeResponse
13/Nov/2011 03:00:58.820: LOG: Received negative response for service ID: StartDiagnosticSession, with response code: ConditionsNotCorrectOrRequestSequenceError
13/Nov/2011 03:00:58.823: USER: Start diagnostic session failed, ECU reports conditions not correct or sequence error. This can occur if the security lockout is running, or the engine is running. Please turn off the ignition and retry.
13/Nov/2011 03:00:58.830: USER: 100% complete.
13/Nov/2011 03:00:58.848: USER: Validating memory layout failed.
13/Nov/2011 03:01:01.270: LOG: Sent message with service ID TesterPresent
13/Nov/2011 03:01:01.312: LOG: Received message with service ID TesterPresentPositiveReponse
13/Nov/2011 03:01:01.994: USER: Restoring Windows sleep mode.
13/Nov/2011 03:01:03.791: LOG: Sent message with service ID TesterPresent
13/Nov/2011 03:01:03.832: LOG: Received message with service ID TesterPresentPositiveReponse
13/Nov/2011 03:01:06.314: LOG: Sent message with service ID TesterPresent
13/Nov/2011 03:01:06.450: USER: Disabling Windows sleep mode.
13/Nov/2011 03:01:06.461: USER: Reading ECU flash memory.
13/Nov/2011 03:01:06.480: USER: Reading ECU identification option: calibrationEquipmentSoftwareNumber
13/Nov/2011 03:01:06.496: LOG: Received message with service ID TesterPresentPositiveReponse
13/Nov/2011 03:01:06.543: LOG: Sent message with service ID ReadECUIdentification
Logged
Cablekid
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13
« Reply #1 on: November 13, 2011, 04:05:59 PM »
Had to split the log into 2 posts

Quote
13/Nov/2011 03:01:06.585: LOG: Received message with service ID ReadECUIdentificationPositiveResponse
13/Nov/2011 03:01:06.594: USER: Read ECU Identification calibrationEquipmentSoftwareNumber: 0x00000000,
13/Nov/2011 03:01:06.604: USER: Successfully read ECU identification information
13/Nov/2011 03:01:06.628: USER: ECU reports programming session preconditions have been met.
13/Nov/2011 03:01:06.636: USER: Negotiating communication timings.
13/Nov/2011 03:01:06.648: LOG: Reading current communication timings.
13/Nov/2011 03:01:06.720: LOG: Sent message with service ID AccessTimingParameters
13/Nov/2011 03:01:06.766: LOG: Received message with service ID AccessTimingParametersPositiveResponse
13/Nov/2011 03:01:06.769: LOG: Reading communication timing defaults.
13/Nov/2011 03:01:06.825: LOG: Sent message with service ID AccessTimingParameters
13/Nov/2011 03:01:06.869: LOG: Received message with service ID AccessTimingParametersPositiveResponse
13/Nov/2011 03:01:06.874: LOG: Reading current communication timings.
13/Nov/2011 03:01:06.930: LOG: Sent message with service ID AccessTimingParameters
13/Nov/2011 03:01:06.977: LOG: Received message with service ID AccessTimingParametersPositiveResponse
13/Nov/2011 03:01:06.980: USER: Successfully changed to new communication timings.
13/Nov/2011 03:01:06.987: USER: Requesting security access.
13/Nov/2011 03:01:07.015: LOG: Sent message with service ID SecurityAccess
13/Nov/2011 03:01:07.061: LOG: Received message with service ID NegativeResponse
13/Nov/2011 03:01:07.064: LOG: Received negative response for service ID: SecurityAccess, with response code: ServiceNotSupported
13/Nov/2011 03:01:07.067: USER: ECU reports that security access is not supported.
13/Nov/2011 03:01:07.077: LOG: Starting diagnostic session type: ProgrammingSession
13/Nov/2011 03:01:07.087: USER: Starting diagnostic session.
13/Nov/2011 03:01:07.122: LOG: Sent message with service ID StartDiagnosticSession
13/Nov/2011 03:01:07.181: LOG: Received message with service ID NegativeResponse
13/Nov/2011 03:01:07.186: LOG: Received negative response for service ID: StartDiagnosticSession, with response code: ConditionsNotCorrectOrRequestSequenceError
13/Nov/2011 03:01:07.192: USER: Start diagnostic session failed, ECU reports conditions not correct or sequence error. This can occur if the security lockout is running, or the engine is running. Please turn off the ignition and retry.
13/Nov/2011 03:01:07.254: USER: 100% complete.
13/Nov/2011 03:01:07.260: USER: Reading ECU flash memory failed.
13/Nov/2011 03:01:09.643: LOG: Sent message with service ID TesterPresent
13/Nov/2011 03:01:09.689: LOG: Received message with service ID TesterPresentPositiveReponse
13/Nov/2011 03:01:09.778: USER: Restoring Windows sleep mode.
13/Nov/2011 03:01:12.166: LOG: Sent message with service ID TesterPresent
13/Nov/2011 03:01:12.206: LOG: Received message with service ID TesterPresentPositiveReponse
13/Nov/2011 03:01:13.631: USER: Disconnecting...
13/Nov/2011 03:01:13.696: LOG: Sent message with service ID StopCommunication
13/Nov/2011 03:01:13.736: LOG: Received message with service ID StopCommunicationPositiveResponse
13/Nov/2011 03:01:13.750: USER: Disconnected
13/Nov/2011 03:01:13.779: LOG: Closing FTDI device.
13/Nov/2011 03:01:13.792: LOG: Send receive thread now terminated.
Logged
Cablekid
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 13
« Reply #2 on: November 13, 2011, 08:22:03 PM »
Nvm i got it reading by changing the baud rate
Logged
Tony@NefMoto
Administrator
Hero Member
*****

Karma: +132/-4
Offline Offline

Posts: 1389


2001.5 Audi S4 Stage 3
« Reply #3 on: December 09, 2011, 12:03:26 PM »
Which baud rate didn't work, and which did you have to use?
Logged
Remember you have to log in if you want to see the file attachments!
Info or questions, please add to the wiki: http://www.nefariousmotorsports.com/wiki
Follow NefMoto developments on Twitter: http://twitter.com/nefmoto
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 22, 2024, 12:27:58 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0s, 0q)