Pages: [1]
Author Topic: How to properly set up 3d maps?  (Read 3715 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« on: November 14, 2011, 06:05:24 PM »

Hey everyone!  Smiley
I'm glad to be part of this huge community which helped me to start my own tuning experience... Now I know that a lot of you are using TunerPro, but I'm more of a WinOls guy and wanted to ask you WinOls people: How to properly set up third axis of 3d map? (please see the attached image)
I have managed to succesfully set up X and Y axis, but struggling to set up z axis. As you see in the image I have numbers like 10000, 20000... 60000. Now I want to convert them to percent 0...100%. But if I try to use Factor in map properties, my whole map scales and not the z axis numbers...

Map in the image is KFPED_0_A Smiley
Logged

cam
Full Member
***

Karma: +10/-1
Offline Offline

Posts: 128


« Reply #1 on: November 15, 2011, 02:52:39 PM »

You have correctly set 3d map :-)
Other case is factors of each map ... Wink
Logged

Cadillac Escalade Platinum ESV 6.2 V8
Audi S4 B5 2.7 BITURBO AZB
Audi TTQ 225HP APX (GTX3076R, 875cc, Integrated Engineering intake manifold, TIAL WG, TIAL BOV) sold
Audi Q7 4.2TDI V8 sold
Yamaha YZF-R1, KAWASAKI GTR1400
WinOLS, EVC OLS300 online emulator, EVC BDM, EVC BSL, Autotuner, CMD, Galletto official, Innovate LC-1, 2wd dyno, EVC dealer
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #2 on: November 16, 2011, 05:58:58 AM »

I meant how to set up max value of axis? Wink now I have ~65000 and I need it max 100. If I use factor 0.001657, axis doesn't change, only values of table... Please check attached image Wink
« Last Edit: November 16, 2011, 06:01:18 AM by masterj » Logged

Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.011 seconds with 16 queries. (Pretty URLs adds 0s, 0q)