i tried flashing my octavia vrs 1.8 using galletto .the flash got interupted in between .now the car wont start up.
plus now i cannot even see ecu data when i click ecu data button on galletto .
plus i havent hooked up my battery to a battery charger.does it need to be hooked to battery charger .the batterry seems to be fine everything is working headlights,wipers,sunroof,audio system except the car wont start. please help!!!!!!!!!!!!!!!!!!!!!

actually i have  made a backup of the remaped file from my ecu wich i read using galletto .then was trying to flash it to stock through stock file.it got interupted now the car is not strating nor the galletto is able to show ecu data .note the car is not hooked up to a battery charger.

Just reflash the ecu in boot mode with your galletto cable. Will mean our have to remove the ecu, make a bench harness and do it out of the car, but it will fix your problem and is a better in my opinion way of flashing an ecu with galletto. Don't panic if you do this you'll be up and running soon. There's a good thread on how to bench flash he ecu,

Black, use magic "search" function on the left. Boot mode, pinouts etc. everything is already here, at this forum or wiki.

You can try "bench" in your car, unplug instruments fuse no 11 (picture below), open your ecu and proceed bood mode as it is in wiki.