Pages: [1] 2
Author Topic: 8N0 906 018 BP - xdf definition file - Audi S3 BAM 2002  (Read 18926 times)
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« on: November 20, 2016, 04:09:39 PM »

Thought I'd share this, since I was not able to find an exact xdf for my 8N0 906 018 BP Audi S3. However, I found a pretty close one thanks to this thread: http://nefariousmotorsports.com/forum/index.php?topic=2511.0 for 8N0 906 018 BH, which I then modified to match the addresses for the 8N0 906 018 BP  + I added a few new scalars I had the addresses for.

If someone has a better file I failed to find or addresses for maps that are missing from this one, I'd really appreciate it if you share. Thanks!
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #1 on: November 23, 2016, 05:23:23 PM »

Here's version 2 of the file, I was able to track down a few tables that have to do with cold starts and warmup, they have been added now.
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #2 on: November 25, 2016, 04:43:56 PM »

Added some idle control maps, thought to update the file...
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #3 on: November 28, 2016, 11:05:51 AM »

Here's what I consider the last version of this file. I pretty much have everything I need to tweak the areas I needed. Please note that I've configured this file to work with MTX's plugin for checksum correction. If you're not using this just go to XDF->View/Edit XDF Header Info->Checksums(tab) and remove the selected checksum.

Still, if someone adds more tables to this, it would be nice to share {:
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #4 on: February 14, 2017, 02:30:05 AM »

I found a nasty 1 byte error in the definition for the FKSTT_0_A and FKSTT_1_A (Cold start enrichment factor) tables, which were messing up the numbers big time. Decided to update the file. This is the only difference to the previous file.
Logged
Pynoxim
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 45


« Reply #5 on: February 14, 2017, 03:56:33 AM »

nicely done man
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #6 on: August 15, 2017, 01:18:43 PM »

Been playing with the car a lot more lately, so I've added more tables, hopefully someone will benefit.
Logged
kontrolm
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #7 on: January 02, 2018, 05:46:15 AM »

Hey
Can You share ori bin file for this xdf ?
Regards
Kris
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #8 on: January 02, 2018, 10:35:17 AM »

Sure
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #9 on: January 02, 2018, 10:36:12 AM »

Also the latest version of the file.
Logged
leo_fischerlf
Newbie
*

Karma: +0/-1
Offline Offline

Posts: 2


« Reply #10 on: February 13, 2018, 11:30:08 AM »

is there a chance to upload this map to an A3 1.8 180hp and improve the hp ?
Logged
mani88
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 4


« Reply #11 on: July 03, 2019, 12:22:15 PM »

I have added: CW_SAWE and KFTVSA for popping/gargle .
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #12 on: July 08, 2019, 02:38:54 PM »

I have added: CW_SAWE and KFTVSA for popping/gargle .

Thanks for the upload! How does this work exactly?
Logged
Awaken
Full Member
***

Karma: +3/-3
Offline Offline

Posts: 84


« Reply #13 on: July 08, 2019, 02:50:06 PM »

I am afraid your file had a small error with the address of this map. I have corrected it and attaching a new version. Please double check if you want.
Logged
stuartdean
Full Member
***

Karma: +1/-8
Offline Offline

Posts: 78


« Reply #14 on: July 18, 2019, 11:14:29 AM »

Hi,

I downloaded the latest tunerpro to load your v9 XDF and your Original BAM Bin works absolutely perfectly in it, but my bin from my 2003 BAM TT doesn't, all the figures are wrong.  Although the same XDF and BIN files worked perfectly well in my AMK S3 - if I was to start using your XDF and edit your bin with my settings instead of my existing ones - will they also work in my 2003 TT BAM ECU - also these settings worked in an immo off ECU I bought.  it is as if the file locations are different in your original file and associated XDF?
Logged
Pages: [1] 2
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.036 seconds with 18 queries. (Pretty URLs adds 0.003s, 0q)