Pages: [1]
Author Topic: 17743 fault code  (Read 3944 times)
zapco
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 6


WWW
« on: November 21, 2016, 08:09:46 AM »

I've got this code about torque monitor after a reprogramming an AUM engine
with K04 setup.Which maps are resposible for torque monitor and must be
altered in order to get this code goes away? (the kfmirl is already a little bit higher)
 
Logged

adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #1 on: November 21, 2016, 08:53:07 AM »

IRL/IOP.
Logged
zapco
Newbie
*

Karma: +0/-6
Offline Offline

Posts: 6


WWW
« Reply #2 on: November 21, 2016, 08:59:36 AM »

irl is already higher any other thoughts
Logged

nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 400


« Reply #3 on: November 21, 2016, 09:46:07 AM »

http://s4wiki.com/wiki/Tuning#Torque_monitoring
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #4 on: November 21, 2016, 11:02:05 AM »

That is your problem.  Messing with one and not the other causes this issue.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)