Pages: [1]
Author Topic: med9 dtc off pls  (Read 6002 times)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« on: December 24, 2016, 02:07:20 AM »

please who can deleted one dtc on med9?thank you

16471/P0087/000135
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2802



« Reply #1 on: December 24, 2016, 04:53:49 AM »

Just fix the problem my god
Logged

Giving your mom a tuneup
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #2 on: December 24, 2016, 05:32:30 AM »

car run fine, without any problems, have new sensors etc..I think problem is in ecu, this dtc(with limp mode) come only sometimes
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #3 on: December 24, 2016, 04:45:15 PM »

It's not the ECU.
Logged
IamwhoIam
Hero Member
*****

Karma: +52/-115
Offline Offline

Posts: 1070


« Reply #4 on: December 25, 2016, 02:54:53 AM »

LOL
Logged

I have no logs because I have a boost gauge (makes things easier)
eazydaz
Full Member
***

Karma: +1/-1
Offline Offline

Posts: 184


« Reply #5 on: December 25, 2016, 11:56:36 AM »

problem is in ecu(right side) mates...rail pressure was measured,logged many times,all is 100% good. Error shows only sometimes, without any problem with power etc, car run fine.
Logged
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #6 on: December 26, 2016, 06:06:31 PM »

problem is in ecu(right side) mates...rail pressure was measured,logged many times,all is 100% good. Error shows only sometimes, without any problem with power etc, car run fine.

Measured manually? There's a fault somewhere. The sensor, the rail, the Hitatchi HPFP or electrics. It's not the ECU.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #7 on: December 27, 2016, 05:42:06 AM »

I thought we were all about being helpful?  Just code all the DTCs out.  Who needs them anyway?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)