Pages: [1]
Author Topic: Help with me7_95040 immo delete  (Read 6230 times)
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« on: December 24, 2016, 07:50:15 PM »

Hey guys I got a Ecu from the junkyard that I want to use in my car but I need to remove the immo.  When I open the me7_95040 in command prompt and type everything I get this.  I am also doing this in the car with a cable.  Any ideas?
Logged
_nameless
Hero Member
*****

Karma: +374/-3456
Offline Offline

Posts: 3027



« Reply #1 on: December 25, 2016, 04:09:55 AM »

Me7eeprom --bootmode 95040 -rp3 read.bin
Logged

UGT Performance | ME7.5 calibration editor, flasher & logger
Audi A4 B6 1.8T (early + late) · AWV / AWP / AWW
· VR6 in beta and 07K in progress
BMW N54, N55, F & G Series, ZF8 calibration editors
https://UGTuner.xyz/
https://github.com/ugtuner05-sys
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #2 on: December 25, 2016, 07:05:44 PM »

thanks
Logged
adam-
Hero Member
*****

Karma: +126/-48
Offline Offline

Posts: 2180


« Reply #3 on: December 26, 2016, 11:29:19 AM »

Why not just code the ECU properly?  Or mirror the EEPROM/flash on the new ECU?
Logged
QuickS4
Full Member
***

Karma: +6/-10
Offline Offline

Posts: 72


« Reply #4 on: December 27, 2016, 12:42:26 AM »

Why not just code the ECU properly?  Or mirror the EEPROM/flash on the new ECU?
Because, it's not a coding issue.  He's trying to get a read of the eeprom first so he can turn off the immo. And that's where he's stuck. If he can't get past this, how is he to immo off the new ecu, right.

Sent from my SM-N900P using Tapatalk
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.463 seconds with 15 queries. (Pretty URLs adds 0.001s, 0q)