Pages: [1]
Author Topic: Need some help or advice with tuning  (Read 6661 times)
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« on: December 25, 2016, 06:22:00 PM »

Hey guys so I am trying to adjust my bin with tunerpro and when I go to change the field and save it goes back to 1.99. Anyone know whats going on? ecu number is 8e0909518f
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2801



« Reply #1 on: December 25, 2016, 07:05:13 PM »

It's in lambda not afr. 1=14.7
Logged

Giving your mom a tuneup
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #2 on: December 25, 2016, 07:10:14 PM »

Okay sorry just trying to learn.
Logged
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #3 on: December 25, 2016, 08:38:36 PM »

Hey guys I have another question  I am trying to adjust LDRXN but I don't understand how to know psi. Can someone explain or point me in the right direction.  I am looking for 18 to 20 psi
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #4 on: December 25, 2016, 08:40:47 PM »

What does the s4wiki.com Tuning page say about that?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #5 on: December 25, 2016, 08:50:40 PM »

I have read the wiki 3 times now but I just get lost....
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Online Online

Posts: 12268


WWW
« Reply #6 on: December 25, 2016, 09:05:30 PM »

There is quite literally nothing I can type here that isn't already said there.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #7 on: December 25, 2016, 09:09:23 PM »

Is there an easier way to  calculate psi?
Logged
_nameless
Hero Member
*****

Karma: +342/-466
Offline Offline

Posts: 2801



« Reply #8 on: December 25, 2016, 09:29:58 PM »

...
Logged

Giving your mom a tuneup
2002b6guy
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 23


« Reply #9 on: December 25, 2016, 09:37:40 PM »

The only problem I have is if I take my highest LDRXN and do that math it does equal my stock psi
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #10 on: December 26, 2016, 11:38:12 AM »

See the heading that says "Approximation"?  There's also a bit that says "this is a rough approximation".  Smiley
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.017 seconds with 18 queries. (Pretty URLs adds 0s, 0q)