Pages: [1]
Author Topic: Checking KRKTE and setting right factor  (Read 6533 times)
masterj
Hero Member
*****

Karma: +61/-5
Offline Offline

Posts: 1049



WWW
« on: November 20, 2011, 03:20:35 AM »

Could someone help me out with KRKTE? I'm trying to test if my current KRKTE factor is OK...

I have 1.8T AWT with 260cc injectors. Current KRKTE is 0.10478 but I can't get this number using (50.2624 * Vhcyl) / Qstat formula. So is my factor bad or my formula?

Factor is 0,000111
ECU SW: 4B0906018DC
Logged

createddeleted
Full Member
***

Karma: +7/-2
Offline Offline

Posts: 90


« Reply #1 on: November 20, 2011, 10:24:58 PM »

So here's my math on this, which I believe to be correct. (which I will be adding to my "theoretical" DIY/reference soon)

Rated vs. Operating pressure:

If you're AWT has 260cc injectors:

260 @ 3Bar (43.5psi) = 260cc
260 @ 4Bar (58.0psi) = 300.22cc (assuming a 4bar FPR that I believe comes stock on your car)


Conversion given n-heptane (the testing solution for injectors valued at 0.684g/cc Density):
300.22 x 0.684 = 205.250 g/min

50.2624*Vhzyl / Qstat

Vhzyl = Displacement/Cylinders = 1.781/4 = 0.44525
Qstat = Injector value @ operating pressure = 205.250

--50.2624*0.44525/205.250
---22.3793336/205.250
Calculated KRKTE= 0.10903

Your stock value: 0.10478
Your calculated value: 0.10903

Technically, thats a 4% final difference in injector calculation, not too far off but enough that I would want to change it.
Logged
masterj
Hero Member
*****

Karma: +61/-5
Offline Offline

Posts: 1049



WWW
« Reply #2 on: November 21, 2011, 01:36:57 AM »

Thank you for calculations Wink I've set my factor to 0,0001155
« Last Edit: November 21, 2011, 01:51:16 AM by masterj » Logged

CQ1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 22


« Reply #3 on: March 15, 2017, 04:17:18 AM »

Thank you for calculations Wink I've set my factor to 0,0001155

Hello,

Was this factor 0,001155 correct? Because i found some info that 0280156065 have 252cc/min @3bar?
Got 4B0906018CG ECU, and KRKTE value 0,10478.
« Last Edit: March 15, 2017, 04:20:01 AM by CQ1 » Logged
CQ1
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 22


« Reply #4 on: March 15, 2017, 04:19:02 AM »

up
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.02 seconds with 16 queries. (Pretty URLs adds 0s, 0q)