Pages: 1 ... 3 4 [5]
Author Topic: 4B0906018DC 0261207636 362358 MAP PACK  (Read 71875 times)
masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #60 on: December 12, 2012, 02:49:16 PM »

Can someone help me to define ESKONF bytes? I have found all the bytes positions (10D34 - 10D3A), but I do not know order of bit doubles in these bytes.

In FR doc it is written that they should be:
byte0: ZUE4 ZUE3 ZUE2 ZUE1 (xx xx xx xx)
byte1: NC NC NC NC (xx xx xx xx)
byte2: EV4 EV3 EV2 EV1 (xx xx xx xx)
byte3: LSHHK EFLA SU/LDR TEV (xx xx xx xx)
byte4: BKV NC AAV MIL (xx xx xx xx)
byte5: NC NC EKP SLP (xx xx xx xx)
byte6: ULT EAGR SLV NWS (xx xx xx xx)


But phila_dot already said that they're different on each binary  Shocked

BTW: Does this file have two ESKONF versions? Shocked (10D34 - 10D3A) & (10D3B - 10D41)?
« Last Edit: December 12, 2012, 02:54:54 PM by masterj » Logged

masterj
Hero Member
*****

Karma: +62/-5
Offline Offline

Posts: 1049



WWW
« Reply #61 on: March 20, 2013, 03:58:54 PM »

A lot of new maps added/fixed. All the folders starting with ** are checked via ASM.

P.S> Only thing that looks weird to me is KFFKRXTM map. Or atleast it's axes.... In most files I see they with pretty high numbers, but in my file max km/h originally is set to 83.75 km/h and engine temperature is mosly negative. Could someone confirm that atleast I have this map correctly defined (including it's axes)?
Logged

leolux
Jr. Member
**

Karma: +4/-0
Offline Offline

Posts: 27


« Reply #62 on: December 26, 2013, 07:44:28 PM »

A lot of new maps added/fixed. All the folders starting with ** are checked via ASM.

P.S> Only thing that looks weird to me is KFFKRXTM map. Or atleast it's axes.... In most files I see they with pretty high numbers, but in my file max km/h originally is set to 83.75 km/h and engine temperature is mosly negative. Could someone confirm that atleast I have this map correctly defined (including it's axes)?

Dos it work you LC and NLS on the 512K ecu without change the ignition driver? Thx for reason

Leo
Logged
midnight_man
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« Reply #63 on: March 04, 2018, 01:58:41 AM »

Thanks a lot for your work!!!! thats great stuff!!!

can anybody help me with cat-heating off?

I have SAI off, rear lambda OFF....need to disable wasting fuel at cold start to heat cat.
« Last Edit: March 04, 2018, 02:12:50 AM by midnight_man » Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 630


« Reply #64 on: March 04, 2018, 03:44:53 AM »

need to disable wasting fuel at cold start to heat cat.

Cat heating isn't the main function of a rich mixture on cold start.
But it also serves this purpose in conjunction with SAI Smiley

https://s4wiki.com/wiki/Tuning#Rear_O2_Sensors
« Last Edit: March 04, 2018, 03:53:41 AM by KasperH » Logged
midnight_man
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« Reply #65 on: March 04, 2018, 03:59:55 AM »

Thanks,

Think I solved it ....its in your signature ...I followed instructions based on map pack I found here Wink

thanks a lot guys!!!!
Logged
selem
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 2


« Reply #66 on: March 08, 2022, 01:09:46 AM »

 some one know adres of
CW_CAN_R and CW_CAN_C  for disable abs and srs ? i do swap for bmw and i hawe problem witch maf sensor i have only  error from abs and srs
Logged
alexvandersaal
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 3


« Reply #67 on: August 10, 2023, 05:48:56 PM »

Hey someone can help with KFZWMN, i only see KFZWMS in this mappack, found it in an old version from 25.04.2012 but ist seems to be wrong scaled or something, but after the update from Masterj in May 2012 it is lost.

Logged
Pages: 1 ... 3 4 [5]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.018 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)