Strange LDR behavior on high rpm, desired boost not reached

Pages: 1 [2]

« previous next »

Author

Topic: Strange LDR behavior on high rpm, desired boost not reached (Read 14937 times)

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #15 on: February 18, 2017, 05:33:02 PM »

You're almost out of injector anyway.

Taper boost.

If you aren't willing to do that, ramp DRL up so flat wg req results in flat boost.

Also, fix your overshoot after ramp. IMX is an incomprehensible mess during spool.


« Last Edit: February 18, 2017, 06:23:36 PM by nyet »	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #16 on: February 18, 2017, 06:22:36 PM »

Seriously, dude, what the hell is going on here?


	Logged

roman_tyk

Full Member

Karma: +0/-0
Offline

Offline

Posts: 87

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #17 on: February 19, 2017, 01:30:09 AM »

Quote from: nyet on February 18, 2017, 05:33:02 PM

You're almost out of injector anyway.

How do you assume that? maximum injection time is 16ms in the logs.
I tried many times to tune KFLDR but it gave more worse results then keeping it in stock.

I am adding two maps.


	Logged

Imho

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 29

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #18 on: February 19, 2017, 11:16:20 AM »

Nyet any suggestions ?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #19 on: February 19, 2017, 12:26:48 PM »

Fix the terribad I limiter behavior, fix DRL.


	Logged

Imho

Jr. Member

Karma: +0/-2
Offline

Offline

Posts: 29

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #20 on: February 22, 2017, 02:10:47 PM »

yea seems that we dont know how.. did you check maps posted by Roman ? shall we check anything else ?


	Logged

nyet

Administrator
Hero Member

Karma: +608/-168
Offline

Offline

Posts: 12270

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #21 on: February 22, 2017, 02:11:54 PM »

Quote from: Imho on February 22, 2017, 02:10:47 PM

yea seems that we dont know how.. did you check maps posted by Roman ? shall we check anything else ?

Follow the input to the map and figure out what cells are being used during spool.

The ridiculous curve is immediately obvious.


« Last Edit: February 23, 2017, 12:32:12 PM by nyet »	Logged

4ringpieces

Full Member

Karma: +4/-4
Offline

Offline

Posts: 232

	Re: Strange LDR behavior on high rpm, desired boost not reached « Reply #22 on: February 23, 2017, 05:43:25 AM »

"Left drl stock" "fucked up dimx"

Understand the input to the DRL map and bingo... you should find your problem


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 09:53:58 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search