Pages: [1]
Author Topic: Boost leak or failed component?  (Read 6180 times)
dokalanyi
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 119


« on: January 06, 2017, 02:05:52 PM »

Hi All,
I'm getting WGDC of 100%. Car was running fine on same tune. It has cut off power at one point, but I failed to replicate even after hard driving.

I've attached logs.
Logged
dokalanyi
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 119


« Reply #1 on: January 06, 2017, 02:12:05 PM »

Couldn't figure out how to modify attachments, here is the log when car was fine. Same tune.
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #2 on: January 06, 2017, 04:16:34 PM »

did fueling change?

if it were a boost leak, i'd expect the opposite lambda control action.
« Last Edit: January 06, 2017, 04:19:47 PM by nyet » Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #3 on: January 06, 2017, 04:20:17 PM »

I'd say turbo failing or collapsing inlet, or some other restriction.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dokalanyi
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 119


« Reply #4 on: January 06, 2017, 08:17:54 PM »

did fueling change?

if it were a boost leak, i'd expect the opposite lambda control action.

Fueling didn't change, and trims are -0.2% and -5.5%. I'll open her up today and inspect the turbo and hoses.

There is also a very low pitch whistle when I accelerate (around 2k rpm).
« Last Edit: January 06, 2017, 08:44:46 PM by dokalanyi » Logged
ktm733
Hero Member
*****

Karma: +18/-9
Offline Offline

Posts: 661



« Reply #5 on: January 07, 2017, 09:48:54 AM »

Do you have a catalytic converter?
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12270


WWW
« Reply #6 on: January 07, 2017, 12:43:50 PM »

Also maybe DV leak?
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
dokalanyi
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 119


« Reply #7 on: January 09, 2017, 12:23:44 AM »

Also maybe DV leak?

I'd come to update the thread with a solution ..
Yes, the diverter valve was torn. Replaced it and the car was back to normal!
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)