Me7.5 O2 circuit Fried... trying to fix

Pages: [1]

« previous next »

Author

Topic: Me7.5 O2 circuit Fried... trying to fix (Read 10432 times)

Jim_Coupe

Hero Member

Karma: +16/-12
Offline

Offline

Posts: 663

	Me7.5 O2 circuit Fried... trying to fix « on: January 08, 2017, 11:20:25 AM »

Hi,

I opened my ECU (me7.5) and discovered that pin51 was coocked inside ecu.. Pin 51 is Front O2 sensor... I have now repaired the broken copper lane but still have problems.. Any ideas on IC´s or other stuff that i shall check that could be broken in the circuit for o2 sensor. ?


	Logged

E85oholic

adam-

Hero Member

Karma: +123/-33
Offline

Offline

Posts: 2179

	Re: Me7.5 O2 circuit Fried... trying to fix « Reply #1 on: January 08, 2017, 02:18:37 PM »

It's not worth repairing.


	Logged

Jim_Coupe

Hero Member

Karma: +16/-12
Offline

Offline

Posts: 663

	Re: Me7.5 O2 circuit Fried... trying to fix « Reply #2 on: January 09, 2017, 07:01:49 AM »

Hehe true...I tried to refit some ic's but naaah.. These narrowband me7.5 ecus are cheap. Already have 2 new ecus on the way. But the question is whay coocked the ecus. Hmmm..


	Logged

E85oholic

jogtx16v

Full Member

Karma: +6/-1
Offline

Offline

Posts: 139

	Re: Me7.5 O2 circuit Fried... trying to fix « Reply #3 on: January 09, 2017, 08:29:27 AM »

common cause is shorted wiring in o2 sensor wiring.


	Logged

Zenerdiode

Newbie

Karma: +1/-0
Offline

Offline

Posts: 18

	Re: Me7.5 O2 circuit Fried... trying to fix « Reply #4 on: January 09, 2017, 01:44:55 PM »

Quote from: Jim_Coupe on January 09, 2017, 07:01:49 AM

But the question is whay coocked the ecus. Hmmm..

By far the biggest reason is the heater element in the O2 sensor fails short-circuit. This was a massive oversight on manufacturer; not to run the heater supply through a fuse.


	Logged

Jim_Coupe

Hero Member

Karma: +16/-12
Offline

Offline

Posts: 663

	Re: Me7.5 O2 circuit Fried... trying to fix « Reply #5 on: January 10, 2017, 04:31:41 AM »

Ok i just had that thought why didnt they fuse the damn wire.. I think ill solder a fuse on that wire just in case and throw in a new O2 sensor and check the wiring. Dont want to fry more ECUs.


	Logged

E85oholic

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1600

	Re: Me7.5 O2 circuit Fried... trying to fix « Reply #6 on: March 12, 2021, 12:42:56 AM »

Was it like this one in your case?


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 23, 2024, 07:38:18 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search