Pages: [1]
Author Topic: Winlog device connection error  (Read 3717 times)
Full Member

Karma: +0/-4
Offline Offline

Posts: 65

« on: January 14, 2017, 10:40:30 AM »

Hi mates,

After serveral hours of making Winlog working....i could not connect

What i have tryied:

Logging via Me7logger , all ok, output is C:\realtime.log.
(Modified me7logger.ini file for this location)

But when i open Winlog , error is :

"error initializing device. would you like to retry?"

I have changed baud rate from 56.000 to 126.000 and slow connect but those have no effect. Logger still working ok but could not initializing device in WinLog.

I have 2 versions of Me7loggerdriver.dll found there on forum.
First version (133kb) is giving me runtime32 error (c++) even if i installed net framework or tried another laptop with Win Xp x32. (Mine is x64)
The second version(141kb) add the device in list without problems... but after that it shows me
the error i have writted up. Need to add in device configuratiom some .cfg file? I leaved it blank.
Thank you.

Karma: +0/-0
Offline Offline

Posts: 4

« Reply #1 on: June 23, 2017, 09:12:57 AM »

We found the problem was with remote connection, the destination was blocking the access from our machine. We changed to a local database for testing.

Full Member

Karma: +2/-0
Offline Offline

Posts: 150

« Reply #2 on: January 09, 2018, 03:28:53 PM »

Hi, I have the same problem, they found a solution ,?
Pages: [1]
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)