Pages: 1 2 3 [4] 5 6
Author Topic: 4B0906018CH 0261207216 360854 MY2001 Audi A4 1.8t  (Read 81699 times)
LHN86
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 63


Engineer


« Reply #45 on: March 13, 2012, 03:48:14 AM »

If I load the ch box this is completely right. but if I load mine cg and putt inn 1F1D8 for LDRXN and 1F21A for LDRXNZK they are kompletely the same. Could it be that my box have the same values or is this random and wrong address on one of them??
BTW, What is your X and Y addresses here?
Logged

BMW E30 M3 S54
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #46 on: March 13, 2012, 04:38:52 AM »

Do me a favor and send me your original file. rob.mwpropane@yahoo.com
I'll take a look. Today I have a little work, then change some suspension parts on my car, and then I'm free. I will take a look at x and y addresses, but I know its nmot (engine speed), and they are located rite before each map.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
LHN86
Full Member
***

Karma: +5/-1
Offline Offline

Posts: 63


Engineer


« Reply #47 on: March 13, 2012, 04:51:52 AM »

Thanks mate. I will meanwhile look for more maps.
Logged

BMW E30 M3 S54
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #48 on: July 30, 2012, 03:08:18 AM »

Updated to include kp file for revision 360101 (in first post)
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
belligerent_b5
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #49 on: July 30, 2012, 09:24:32 PM »

I think that your y-axis address for KFTARX and KFTARXZK is off in your 360101 map pack. I believe it should be 13480.

But again, thanks for posting this.
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #50 on: July 31, 2012, 03:37:45 AM »

I think that your y-axis address for KFTARX and KFTARXZK is off in your 360101 map pack. I believe it should be 13480.

But again, thanks for posting this.

I believe your right! Fixed and updated in the ori post. Thanks for pointing this out (maybe I was tired Huh Roll Eyes). Let me know if you find any others, but in reality, 99% should be good. I have never changed axis in KFTARX/KFTARZK, but when you change values in structure PLEASE proofread before doing so (sounds like you are!)
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #51 on: July 31, 2012, 03:41:39 AM »

Yes it was, thank you for pointing this out. Fixed in ori post. Let me know if you find any others. When changing any structure PLEASE proofread before doing so (sounds like you are!!)
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 268



« Reply #52 on: November 06, 2012, 07:09:20 PM »

Could you post the CSV for the 360101 software?  LDRXN isn't ligning up.

Side note, how can I find out which software I'm working with?
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #53 on: November 06, 2012, 07:12:33 PM »

ldrxn: 1f0e4
Logged
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #54 on: November 07, 2012, 06:50:51 AM »

Could you post the CSV for the 360101 software?  LDRXN isn't ligning up.

Side note, how can I find out which software I'm working with?

I'm not sure in tunerpro, but winols (even demo) file>properties.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 268



« Reply #55 on: November 07, 2012, 11:17:44 AM »

The location that k0mpresd mentioned was correct so my CH must be the earlier software. I ended up figuring out the maps I needed to delete secondary air and rear O2 so I really don't need anything else however if you do have the csv for the early software, I wouldn't mind working on an XDF for the community.
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #56 on: November 07, 2012, 11:36:13 AM »

I'm not in front of the pc (have the kids at the dentist), but I'll try to see if I can upload back here later. If I don't, just pm me to remind me;)

***Here you go. Anyhing written at the top and not filed in a sub folder is still a work in progress;)
« Last Edit: November 08, 2012, 03:44:46 AM by rob.mwpropane » Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
amd is the best
Sr. Member
****

Karma: +11/-5
Offline Offline

Posts: 268



« Reply #57 on: November 08, 2012, 08:52:07 PM »

I'm not in front of the pc (have the kids at the dentist), but I'll try to see if I can upload back here later. If I don't, just pm me to remind me;)

***Here you go. Anyhing written at the top and not filed in a sub folder is still a work in progress;)

AWESOME!

Thank you very much!  Karma has been given.
Logged

2012 Golf TDI
2001 Audi A4 2.8 30v Supercharged
1991 Audi 200 20v
rob.mwpropane
Sr. Member
****

Karma: +32/-0
Offline Offline

Posts: 370


WWW
« Reply #58 on: November 09, 2012, 03:14:55 AM »

AWESOME!

Thank you very much!  Karma has been given.

You sir are more than welcome.
Logged

This has nothing to do with cars but you can see my glorifying job at,

www.MWPropane.com
masterj
Hero Member
*****

Karma: +61/-5
Offline Offline

Posts: 1049



WWW
« Reply #59 on: November 12, 2012, 04:52:44 PM »

Hi, Rob! Smiley Do you remember up setzi disassembling binary? Did he dissasemble whole prokonal in 18000 area or just part of it? Smiley
Logged

Pages: 1 2 3 [4] 5 6
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 18 queries. (Pretty URLs adds 0s, 0q)