Pages: 1 ... 3 4 [5] 6
Author Topic: 4B0906018CH 0261207216 360854 MY2001 Audi A4 1.8t  (Read 81679 times)
catbed
Sr. Member
****

Karma: +8/-1
Offline Offline

Posts: 300


« Reply #60 on: February 04, 2013, 01:39:21 AM »

Here is an updated 360101 map pack with a few more maps added from NWSOLLE and ZUESZ. NWSOLLE is cam changeover and ZUESZ is for 2.0t coil pack conversion dwell times.
Logged
MadCow
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 108


« Reply #61 on: February 22, 2013, 09:36:44 PM »

If it's not too much to ask, would you be able to find the location of cw_can_r? I've exhausted my admittedly limited skill set and gotten nowhere. It's defined in the TT and S4 damos but I can't match it to this bin.
Logged
catbed
Sr. Member
****

Karma: +8/-1
Offline Offline

Posts: 300


« Reply #62 on: March 26, 2013, 10:36:03 PM »

If it's not too much to ask, would you be able to find the location of cw_can_r? I've exhausted my admittedly limited skill set and gotten nowhere. It's defined in the TT and S4 damos but I can't match it to this bin.

sorry for the late reply, but I think CW_CAN_R_0 is located @136BC. R_1, R_2, R_3 should be the next 3 bytes.
Logged
MadCow
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 108


« Reply #63 on: March 28, 2013, 07:46:48 PM »

sorry for the late reply, but I think CW_CAN_R_0 is located @136BC. R_1, R_2, R_3 should be the next 3 bytes.

Is this for the 360854 or 360101 bin? I'm looking at a 360854 file and if it's there then the configurations wouldn't make sense.
Logged
catbed
Sr. Member
****

Karma: +8/-1
Offline Offline

Posts: 300


« Reply #64 on: March 29, 2013, 04:15:20 PM »

Is this for the 360854 or 360101 bin? I'm looking at a 360854 file and if it's there then the configurations wouldn't make sense.

That is for the 360101, sorry I should have specified.
Logged
MadCow
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 108


« Reply #65 on: March 29, 2013, 05:53:15 PM »

Turns out I was looking at a 360101 all along actually. What values do you have there?
Logged
catbed
Sr. Member
****

Karma: +8/-1
Offline Offline

Posts: 300


« Reply #66 on: March 29, 2013, 06:26:12 PM »

Turns out I was looking at a 360101 all along actually. What values do you have there?

@136BC I have 250dec.
Logged
MadCow
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 108


« Reply #67 on: March 30, 2013, 07:47:07 PM »

Ok that's what I have too, that would make the configurations:
CAN_0 - Getriebe 2, Airbag, LWS, Kombi, Allrad 1, Bremse 3
CAN_1 - Nothing at all
CAN_2 - Airbag, Kombi
CAN_3 - Bremse 1, Airbag, LWS, Kombi

None of those really make sense. LWS is steering wheel controls and isn't present in any of the TT or S4 configuration so it shouldn't be here. All zeros is a bit fishy, wouldn't expect that. I only get errors for communications with ABS and the cluster, so I would assume that would be one of the options.
Logged
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219


« Reply #68 on: December 22, 2013, 09:05:08 AM »

this is a very helpful map pack although I'm running into an issue with KFZW, KFZW2, KFMIOP and LDRXN. Possibly the wrong Addresses? I mean the values in IOP and LDRXN seem spot on but the axis are broken on all maps.

I've attached the .bin



« Last Edit: December 22, 2013, 01:05:31 PM by em.Euro.R18 » Logged
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219


« Reply #69 on: December 22, 2013, 01:10:52 PM »

this is a very helpful map pack although I'm running into an issue with KFZW, KFZW2, KFMIOP and LDRXN. Possibly the wrong Addresses? I mean the values in IOP and LDRXN seem spot on but the axis are broken on all maps.

I've attached the .bin





Accidently attached the def file before this is the .bin
Logged
s5fourdoor
Hero Member
*****

Karma: +33/-3
Offline Offline

Posts: 617


« Reply #70 on: December 27, 2013, 05:55:26 PM »

This is a great start for 4B0906018CH ecu.
I'm going to be updating my progress here with a periodic XDF similar to what I did for the S4's M-box.
The entire 1.8t & 2.7t tuning process needs to be simplified, the cars are over 10 years old now.
Logged
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219


« Reply #71 on: January 16, 2014, 10:04:48 PM »

That would be great!!!! so far I fixed KFMIOP KFMIRL KFZW LAMFA KFLDIMX and LDRXN

I'm searching for CDKAT KFLBTS KFDLBTS

according to the currect XDF CWDLSAHK is located at 18613 but I've read on here its on 18663 but I cannot tell which is correct. I'll post my corrected XDF for CH version 360854 I've hit a brick wall as far as my understanding on finding and coding out the catalyst.
Logged
ddillenger
Hero Member
*****

Karma: +637/-21
Offline Offline

Posts: 5640


« Reply #72 on: January 16, 2014, 11:22:15 PM »

KFLBTS 193B3
KFDLBTS 1D1CE
CDKAT 181A1
CDKATSP 181A2
CDKATSPF 181A3
CWDLSAHK 18613
Logged

Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience!

Email/Google chat:
DDillenger84(at)gmail(dot)com

Email>PM
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219


« Reply #73 on: January 17, 2014, 02:41:52 PM »

Perfect thanks!!! But how do you find the load axis for BTS? Comparing a defined HS bin right now looks like its in a completely different part of the binary.
Logged
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219


« Reply #74 on: January 25, 2014, 04:02:44 PM »

I think I found KFMLDMX - 1C594?
Logged
Pages: 1 ... 3 4 [5] 6
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.053 seconds with 17 queries. (Pretty URLs adds 0s, 0q)