Pages: [1]
Author Topic: M5.9.2 037906018E immobilizer troubles  (Read 4313 times)
1gcrazy
Full Member
***

Karma: +0/-2
Offline Offline

Posts: 98


« on: January 19, 2017, 10:28:19 AM »

I've got a 037906018E Ecu. M5.9.2 and trying to get the immobilizer off. Which program could I use? I read something from Daz and he says he runs them through a program but so far nothing i've done has worked. I've unsoldered the eprom: 24C02 and read it on the GQ-4x. Here's what it looks like.
Logged
ANDR
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 57


« Reply #1 on: January 19, 2017, 11:58:19 PM »

Immo off...
Logged
_nameless
Hero Member
*****

Karma: +320/-445
Offline Offline

Posts: 2654



« Reply #2 on: March 06, 2017, 07:04:22 AM »

Immo off...
THIS IS TRASH! DONT USE
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
ANDR
Full Member
***

Karma: +2/-1
Offline Offline

Posts: 57


« Reply #3 on: March 19, 2017, 11:46:24 PM »

Was in a hurry, sorry
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 17 queries. (Pretty URLs adds 0s, 0q)