KFMIRL is inverse of KFMIOP.
There is no "lower" or "increase". It is a mathematical function.
Don't take everything that is in the s4wiki for granted, a lot of it is wrong.
Hi,
are y sure?
I used the same factor for load for both maps to get bars.
In IRL @100 throttle I see 1.1b
in IOP load is up to 0.9 I have around 80% of throttle??? (is this like invDW in EDC16/17?)
(limited with LDRXN to around 0.66)
In IOP values like 1.1bar doesnt exist (max is 0.9)
If I would set in LDRXN 2b... than I would drive (fill throttle) 0.9 or 1.1b?
br,
Przemek
