immo off on 06A906019AK

Pages: [1]

« previous next »

Author

Topic: immo off on 06A906019AK (Read 7615 times)

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	immo off on 06A906019AK « on: January 30, 2017, 12:58:38 AM »

Hey, information on these seems pretty thin on the ground. Lips sealed

Can any of you guys in the know, help me out? I have seen off'd eeproms, off'd AM29AF200 bin, K lines being cut. Not sure where to go next.

I read the eeprom as that was easy to do. 93c56 read with 8 bit (that's another random factor?)

Thanks in advance


	Logged

_nameless

Hero Member

Karma: +342/-466
Offline

Offline

Posts: 2800

	Re: immo off on 06A906019AK « Reply #1 on: January 30, 2017, 04:10:51 AM »

just playing about give it a shot


	Logged

Giving your mom a tuneup

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: immo off on 06A906019AK « Reply #2 on: January 30, 2017, 03:32:20 PM »

Thanks Marty.

On a scale of 1-10 what's the odds of it working as a percentage? Grin

I'll try it tonight and post back.


	Logged

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: immo off on 06A906019AK « Reply #3 on: January 31, 2017, 01:40:37 AM »

2 hours in and i can't write anything to the eeprom.

GQ-3X latest software. the eeprom will fill with FF and read back. Fails the verify everytime at the first address, even trying to flash the original read. In the device list there's 8 and 16bit versions of the chip. I am trying to use the same device as the one I took the read with, 8bit

This is using a socket in the programmer not a clip.

Anyone have any ideas for me?

TIA


	Logged

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: immo off on 06A906019AK « Reply #4 on: February 03, 2017, 12:56:37 AM »

Bought new chip, wrote first time with original read file. Going to try and see that the car starts before proceeding further.


	Logged

h100vw

Jr. Member

Karma: +0/-0
Offline

Offline

Posts: 34

	Re: immo off on 06A906019AK « Reply #5 on: February 09, 2017, 06:39:12 PM »

Car has hardware fault and the immo trips, looks like the reader coil is fubar.

This is with the original data restored to a new chip. I am thinking I damaged the first one removing it from the board.


	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 24, 2024, 01:57:22 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search