Low impedance injectors 1.8t ME 7.5

Pages: [1]

« previous next »

Author

Topic: Low impedance injectors 1.8t ME 7.5 (Read 4034 times)

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Low impedance injectors 1.8t ME 7.5 « on: February 02, 2017, 12:32:18 AM »

I got some AUS 1000cc low Z injectors for helping a friend with his car, it came with flow charts and battery offset.

Would it be worth it to install a resistor pack being that ME 7.5 is high Z?
Or should I trade/sell them for some lower cc high z injectors?

Couldn't really find any substantial info about low Z injectors and resistor packs for the 1.8t.


	Logged

TijnCU

Hero Member

Karma: +60/-4
Offline

Offline

Posts: 690

flying brick

	Re: Low impedance injectors 1.8t ME 7.5 « Reply #1 on: February 02, 2017, 03:00:52 AM »

I would not go through that trouble when there are suitable injectors for your application. Do you need 1000cc? I am not sure if that will idle very well on a small displacement like the 1.8t due to minimum opening times. At least not all of the brands that are out there... Decide your power goals first, if it is under 400hp I would not go any bigger than 550cc on petrol.


	Logged

My project (all photos back online!)

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: Low impedance injectors 1.8t ME 7.5 « Reply #2 on: February 02, 2017, 03:22:41 AM »

I'm still on stock-ish k03s hardware so that was my initial thought too, but the headroom would always be nice.
But again the headroom I would get with 1000cc would be huge Tongue

I was thinking something along the lines of some Bosch EV14 650cc would be more than enough, and would leave headroom for bigger/hybrid turbo


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Low impedance injectors 1.8t ME 7.5 « Reply #3 on: February 02, 2017, 04:59:09 AM »

That is too much headroom and you'd never be able to tune them properly.

Bosch is 630cc; not 650. Flows fine at 360bhp at 3 bar. 550 would be fine too.


	Logged

KasperH

Hero Member

Karma: +24/-8
Offline

Offline

Posts: 630

	Re: Low impedance injectors 1.8t ME 7.5 « Reply #4 on: February 02, 2017, 05:57:01 AM »

Yeah I'm going 630/550cc depending on how much I get for the AUS injectors.

Thanks for your help


« Last Edit: February 02, 2017, 05:59:47 AM by KasperH »	Logged

Pages: [1]

« previous next »

Jump to:

Navigation

Personal Tools

November 29, 2024, 03:55:11 PM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search