NefMoto > Technical > Diagnostics > Relationship between ECU and TCU
Pages: [1]
« previous next »
Author Topic: Relationship between ECU and TCU  (Read 6078 times)
gruppe5
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7
« on: February 08, 2017, 08:31:07 PM »
Can anyone explain it? I ask because I get a "incompatible" message on a 4.2 swapped C5 A6 ( originally a 3.0 ) How does the ECU know which TCU is connected and furthermore can that be programmed out??
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #1 on: February 09, 2017, 02:45:09 AM »
3.0 = 5hp19, 4.2 = 5hp24, is why you receive that message.

if you used the original 3.0 gearbox/tcu, this can be fixed in the 4.2 ecu software very easily.
if you used the original 4.2 gearbox, then you should be using 4.2 tcu as well.
Logged
gruppe5
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7
« Reply #2 on: February 09, 2017, 01:04:20 PM »
Quote from: k0mpresd on February 09, 2017, 02:45:09 AM
3.0 = 5hp19, 4.2 = 5hp24, is why you receive that message.

if you used the original 3.0 gearbox/tcu, this can be fixed in the 4.2 ecu software very easily.
if you used the original 4.2 gearbox, then you should be using 4.2 tcu as well.

I used the original 3.0 transmission ( 5HP19 ) and ECU. I could not find the solution anywhere I looked, right now I am trying a different TCU from a 2.7t but if you have a solution it would be great.  The error message was 18249 - Engine Control Module / Transmission Control Module Incompatible
Logged
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655
« Reply #3 on: February 10, 2017, 06:11:15 AM »
i know solution. tcu swap is not it, 2.7t = 5hp19 as well.
Logged
gruppe5
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 7
« Reply #4 on: February 10, 2017, 07:28:34 AM »
Quote from: k0mpresd on February 10, 2017, 06:11:15 AM
i know solution. tcu swap is not it, 2.7t = 5hp19 as well.

I figured it was worth a shot (ECU swap) but that did not work.  Right now I cant move the car unless I push it, what can I do?
Logged
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 401
« Reply #5 on: March 13, 2017, 02:40:56 PM »
CANVERS, FMOTC, CWGC in the ECU.
Set those to proper values to match those in TCU.
(Better late than never, huh?) Cheesy

PS:
PM if you can't figure it out yourself.
« Last Edit: March 13, 2017, 02:42:44 PM by nubcake » Logged
10101011
Full Member
***

Karma: +10/-13
Offline Offline

Posts: 161



WWW
« Reply #6 on: March 23, 2017, 11:34:28 AM »
Quote from: gruppe5 on February 10, 2017, 07:28:34 AM
I figured it was worth a shot (ECU swap) but that did not work.  Right now I cant move the car unless I push it, what can I do?


Have you tried to contact NYET on this forum ??  How did that cylinder head I sold you work out  the 2.0T ?  Grin
Logged
Poor quality lingers long after the price is forgotten ....
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • April 19, 2024, 10:33:55 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)