Pages: [1]
Author Topic: 5HP24 TCU on 6 cyl ECU?  (Read 2942 times)
vtraudt
Sr. Member
****

Karma: +4/-7
Offline Offline

Posts: 377


WWW
« on: February 13, 2017, 04:53:08 AM »

Possible to tune the 5HP24 TCU (used on 8 cyl engine) to work with 6 cyl ECU (or vice versa)?
Logged

2002 Allroad 2.7T 6spd stage 2
1998 A4 1.8T 5spd stage 3
1996 A4 2.8 auto stock
k0mpresd
Hero Member
*****

Karma: +146/-54
Offline Offline

Posts: 1655


« Reply #1 on: February 13, 2017, 06:43:22 AM »

ecu needs edit, not tcu. then will work.
Logged
eakinsj
Newbie
*

Karma: +1/-0
Offline Offline

Posts: 17


« Reply #2 on: August 06, 2022, 01:15:27 PM »

I have a 2004 allroad with a 2.7 engine. I have installed a transmission from a 4.2 allroad in. I have also changed the rear differential. The data being reported from the TCU is now incorrect and causing the car to idle weird. TCU is sending maxed out load values to the ECU. Is there any way to fix this problem without getting a allroad 4.2 TCU?
Logged
BlackT
Hero Member
*****

Karma: +79/-39
Offline Offline

Posts: 1419



« Reply #3 on: August 06, 2022, 03:52:58 PM »

Post full scan from VCDS
Logged
_nameless
Hero Member
*****

Karma: +320/-448
Offline Offline

Posts: 2671



« Reply #4 on: August 07, 2022, 01:27:00 AM »

I have a 2004 allroad with a 2.7 engine. I have installed a transmission from a 4.2 allroad in. I have also changed the rear differential. The data being reported from the TCU is now incorrect and causing the car to idle wput the roper tcu in the careird. TCU is sending maxed out load values to the ECU. Is there any way to fix this problem without getting a allroad 4.2 TCU?
Logged

If you are in the market for a tune and would like the ease of downloading and flashing a dyno tested tune for a fair price check out https://instatune.sellfy.store/
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.023 seconds with 17 queries. (Pretty URLs adds 0s, 0q)