Pages: [1]
Author Topic: me7 audi a4 1.8t tuning  (Read 3944 times)
bobg
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20


« on: February 18, 2017, 03:55:04 PM »

Hey everyone,

Hoping I can get some help here. I am very new to this and I am trying to adjust ldrxn as per s4 wiki to raise boost, if I am understanding correctly I should be getting approx 18psi. My adjustments did make minor difference but no much. I have attached bin file for review.

Thx
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-166
Offline Offline

Posts: 12233


WWW
« Reply #1 on: February 18, 2017, 05:33:57 PM »

Post logs.
Logged

ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
bobg
Newbie
*

Karma: +0/-2
Offline Offline

Posts: 20


« Reply #2 on: February 19, 2017, 04:01:15 PM »

Post logs.

thx nyet, I dont have a cable that I can currently log with. I am using mpps for flashing. I started from scratch following the wiki and all seems pretty good now I dont know what was holding the boost back but I just copied ldrxn from old file etc and now i'm getting around 18psi.

thx again,
Logged
dokalanyi
Full Member
***

Karma: +4/-1
Offline Offline

Posts: 118


« Reply #3 on: February 19, 2017, 11:09:40 PM »

You should really not be tuning without the ability to log. Just flash the stock file back, and then order for a cable that can log and wait.
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178


« Reply #4 on: February 20, 2017, 02:33:24 AM »

Have you got sorted fuel?
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.016 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)