Pages: [1]
Author Topic: Revo tune - flashing over it  (Read 5816 times)
ianpgonzaga
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« on: February 20, 2017, 01:20:29 AM »

hi all,

tried to read a ECU pn# 8N0 906 018 BJ (s3 8L) and it seems the car is now in valet mode. no boost. no power.

i am wondering if i can just overwrite the file with a generic one and work on the tune from there?

thanks!



Logged
spacey3
Full Member
***

Karma: +12/-1
Offline Offline

Posts: 198


« Reply #1 on: February 20, 2017, 01:51:26 AM »

IIRC you'll also need to flash over the Eeprom too as Revo touch that also...
Logged
ianpgonzaga
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #2 on: February 20, 2017, 02:30:38 AM »

ok thanks!

so need to pull the eeprom first from the cluster

and then change the eeprom... and looks like bootmode
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179


« Reply #3 on: February 20, 2017, 02:32:22 AM »

Nah, fresh write over the ECU EEPROM and flash.  Bootmode.
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #4 on: February 20, 2017, 01:18:12 PM »

hi all,

tried to read a ECU pn# 8N0 906 018 BJ (s3 8L) and it seems the car is now in valet mode. no boost. no power.

i am wondering if i can just overwrite the file with a generic one and work on the tune from there?

thanks!






possible to change revo file working ...
i made few revo file
only need modification eeprom and flash
and after working fine after modification revo flash
Logged
ianpgonzaga
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #5 on: February 21, 2017, 12:45:19 AM »

Nah, fresh write over the ECU EEPROM and flash.  Bootmode.

So i need to get a virgin EEPROM? His ECU is the same part number as my ECU.... will the EEPROM (with the IMMO, VIN etc. changed in HEX) be OK to upload onto his? The flash i have is also pulled form the same ECU part#....

I pulled the EEPROM from his cluster so i have that information


possible to change revo file working ...
i made few revo file
only need modification eeprom and flash
and after working fine after modification revo flash

Does this mean there's a way to be able to "activate" the aftermarket tune??? what needs to be done?

thanks

did a short logging session (roads too busy) but you can clearly see full load is not being requested even when foot is on the floor
Logged
sonique
Sr. Member
****

Karma: +24/-12
Offline Offline

Posts: 283


« Reply #6 on: February 21, 2017, 06:17:38 AM »

yes possible
send me pm
Logged
Pynoxim
Jr. Member
**

Karma: +2/-0
Offline Offline

Posts: 45


« Reply #7 on: February 21, 2017, 10:10:12 AM »

Also, if you were somehow able to find a Revo SPS, that would save you too.
Logged
ianpgonzaga
Jr. Member
**

Karma: +0/-0
Offline Offline

Posts: 34


« Reply #8 on: February 21, 2017, 01:24:55 PM »

Also, if you were somehow able to find a Revo SPS, that would save you too.

Yeah going to get him to go to a revo dealer to check the tune
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)