Pages: [1]
Author Topic: Re: Nefmoto community project: Stage1 1.8t ME7.5 A4 (8E0909518AK-0003)  (Read 3664 times)
gin+
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 39



So after months of reading and learning from other members hard work, I would like to share some log results.  Bone stock B6 on 93oct.  I made some fueling tweaks to the OP's tuned file and I anticipate making several more.  At this point I just want to make sure it's safe to drive on.  I am getting (IMO) a bit of timing pull which I might try to sort out with different plugs/gap etc or just numb it back to stock. Thanks gents!

Logged
gin+
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 39


« Reply #1 on: February 23, 2017, 05:52:54 PM »

logfile attached;
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #2 on: February 23, 2017, 07:27:58 PM »

That looks fantasic! Pull a few degrees of requested timing and you should be set.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
gin+
Jr. Member
**

Karma: +2/-1
Offline Offline

Posts: 39


« Reply #3 on: February 24, 2017, 07:41:51 AM »

Thanks for checking it out nyet.  Besides timing, I'd like to smooth out that AF curve a bit.  I have TLAFA zeroed out and ZK set at 60% across the board so I may drop it to 45% on next flash.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.012 seconds with 16 queries. (Pretty URLs adds 0s, 0q)