Pages: [1]
Author Topic: I am installing S60R Motor and Manual trans in auto XC70  (Read 3784 times)
Thebigk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« on: March 02, 2017, 08:46:42 PM »

Hi guys,

I wanted to see what exactly I need to get this going. From my understanding if I just flash an S60R 2004 manual transmission Bin, I'll be fine, it's unconfirmed whether I will need a CEM flash as well. (hopefully not)

Otherwise I am wondering if removing 4C will give me a headahce.
Logged
venderbroeck
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #1 on: March 03, 2017, 07:12:38 AM »

Depends on what year your xc is.
The internal rom of different my ecu's is different as well as is the can bus speed and the immo setup. Using a different generation bin than what came with your car is not very feasable afaik.
You're better off modifying a manual bin from the same my to suit the engine.
Logged
Thebigk
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 6


« Reply #2 on: March 03, 2017, 07:47:10 AM »

both are 2004, USA versions. I read Euro years are different for R's. I hope  the same year would of made it easier to move
Logged
venderbroeck
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #3 on: March 03, 2017, 08:37:22 AM »

Comparing the asm may yield more info. Or trying it out in a spare ecu or smth. Making it work if it doesn't may be quite a challenge, but I don't know enough of the details of the differences between those bins to be sure.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.015 seconds with 17 queries. (Pretty URLs adds 0s, 0q)