Pages: [1]
Author Topic: Trouble finding KFTARX in this 032LP version 36518  (Read 3178 times)
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219


« on: March 17, 2017, 11:27:59 AM »



I've tryed 10x12 and 8x12. Its usually after HBN but nothing seems to line up for me regardless of bin I use to compare.
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #1 on: March 17, 2017, 11:34:49 AM »

if the map that is highlighted in your screenshot is what you are trying to find, it looks like you've found it.  What's the issue?   Notice each byte is white.... no differences.
Logged
em.Euro.R18
Full Member
***

Karma: +4/-5
Offline Offline

Posts: 219


« Reply #2 on: March 17, 2017, 11:39:32 AM »

I'm comparing the closest comparable bin that is defined to the one I am trying to define on the right. The map that I found is HBN which is lined up with the jetta on the left. I posted the image because it shows how kftarx on the left looks compared to the bin on the "right" which Im trying to define. As you can see the pattern doesnt look like its even close and Ive tryed a number of offsets but it just isnt lining up. So I figured maybe the map was larger than the compare bin but even that doesnt help because the axis values arnt there. I think I had trouble like this with the last jetta I did but its been a long time since then. Maybe Im making a newb mistake somewhere.


The bin I'm trying to define is attached below.

« Last Edit: March 17, 2017, 12:04:07 PM by em.Euro.R18 » Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.013 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)