Pages: 1 ... 4 5 [6] 7 8 ... 22
Author Topic: Actual pre-control in LDRPID  (Read 217907 times)
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #75 on: August 02, 2017, 06:03:11 AM »

they are old logs..

recent ones from other setup with accel pedal, but are a little big and only 40 to 70 duty

canĀ“t seem to get a good result at 70 duty

but will try it tonight

Logged
prj
Hero Member
*****

Karma: +903/-420
Offline Offline

Posts: 5787


« Reply #76 on: August 02, 2017, 11:57:32 AM »

Those logs won't work very well without accel pedal in them.  The tool filters out points less than 80% pedal.   If you don't have accel pedal in the log, it takes every point.

I recommend using wdkba instead of wped and filtering by increasing rpm with some allowance for jitter.
Logged

PM's will not be answered, so don't even try.
Log your car properly.
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #77 on: August 02, 2017, 01:09:30 PM »

I recommend using wdkba instead of wped and filtering by increasing rpm with some allowance for jitter.

That's not a terrible idea to use throttle plate angle instead, it's essentially the same thing, but I bet it will fix an issue that I had to work around where the WGDC is not at the expected fixed level as soon as the throttle plate is smashed to the floor.

I am currently filtering out spool up by a pressure increase over a set time span, which is configurable.
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #78 on: August 02, 2017, 09:13:23 PM »

- Fixed some bugs in the way the pressure grid is loaded from logs
- additional filtering on throttle plate angle
- extrapolate cells with missing data (background red)
« Last Edit: August 03, 2017, 04:45:22 AM by SB_GLI » Logged
aef
Hero Member
*****

Karma: +69/-46
Offline Offline

Posts: 1566


« Reply #79 on: August 02, 2017, 10:48:44 PM »

hats off

would recommend to add some kind of version number in the tool itself and toolname attached to your posts.
Logged
armageddon
Sr. Member
****

Karma: +20/-3
Offline Offline

Posts: 348


« Reply #80 on: August 03, 2017, 01:33:43 AM »

Can not get new version to work with my logs, error message pops up

whith your logs works fine..
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #81 on: August 03, 2017, 04:44:59 AM »

Can not get new version to work with my logs, error message pops up

whith your logs works fine..

Sorry bout that.  Fixed
« Last Edit: August 06, 2017, 02:08:28 PM by SB_GLI » Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #82 on: August 03, 2017, 07:41:10 AM »

Latest version crashes with Volvo log files.
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #83 on: August 03, 2017, 08:50:04 AM »

Latest version crashes with Volvo log files.

lolz, please upload your logs here.
Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #84 on: August 03, 2017, 09:02:21 AM »

lolz, please upload your logs here.

sorry...

attached.
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #85 on: August 03, 2017, 09:31:03 AM »

sorry...

attached.

This .rar seems to not be a .rar.   Or at least not one that 7zip can handle.
Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #86 on: August 03, 2017, 10:37:09 AM »

Dl winrar
Logged
SB_GLI
Hero Member
*****

Karma: +115/-10
Offline Offline

Posts: 1022


« Reply #87 on: August 03, 2017, 01:19:23 PM »

first time I have had to use winrar itself to extract a rar....  7zip has handled it just fine in any other case I can remember.

Your logs worked just fine for me.   Did you dl the last update that I posted?  The zip file (v 1.2) immediately above your post saying that it crashes.
« Last Edit: August 03, 2017, 01:26:23 PM by SB_GLI » Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #88 on: August 03, 2017, 01:38:49 PM »

Yes, I downloaded the zip. I will try again.
Maybe its because I edited the axes?
Logged
Lost
Hero Member
*****

Karma: +21/-14
Offline Offline

Posts: 556


« Reply #89 on: August 04, 2017, 01:37:10 AM »

Thanx for great gui. 
Just to clarify.
This is used only with Visual logger or both VL and Me7 logger?
Logged
Pages: 1 ... 4 5 [6] 7 8 ... 22
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.022 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)