NefMoto > Noob Zone > Noob Questions (Moderator: turboat) > S4 M box reads ecu data as 29f800bt.
Pages: [1] 2
« previous next »
Author Topic: S4 M box reads ecu data as 29f800bt.  (Read 9850 times)
boostaddict1989
Full Member
***

Karma: +0/-18
Offline Offline

Posts: 60
« on: March 29, 2017, 09:41:21 PM »
This ecu wont start my car. It flashes. In car or out. Boot mode galletto or regular flash with nef. Nothing seems to make this ecu want to start my car. any ideas? Maybe I missed something. Have ft232r and gellatto cable. Both do their job. Ecu just wont start the car. One thing it may be is that i cant seem to clear all the faults but i though a full write flash takes care of those? Another confusion is galletto things the ecu has a 29f800bt but i opened her up to do boot mode and it shows 29f800bb. I'ts a genuine mbox 0001 so im wondering if previous owner flashed an incorrect file. What should i do?
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-168
Offline Offline

Posts: 12236


WWW
« Reply #1 on: March 29, 2017, 10:49:06 PM »
What are the faults?
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632
« Reply #2 on: March 30, 2017, 12:02:26 AM »
I'll bet you got some kind of flash related fault stored on your eeprom? Smiley
Logged
boostaddict1989
Full Member
***

Karma: +0/-18
Offline Offline

Posts: 60
« Reply #3 on: March 30, 2017, 01:43:32 AM »
Quote from: nyet on March 29, 2017, 10:49:06 PM
What are the faults?





Here you go. I clear them, try to start car and they come back.
Logged
boostaddict1989
Full Member
***

Karma: +0/-18
Offline Offline

Posts: 60
« Reply #4 on: March 30, 2017, 01:55:12 AM »
Quote from: KasperH on March 30, 2017, 12:02:26 AM
I'll bet you got some kind of flash related fault stored on your eeprom? Smiley
I'm trying to use visualme7loggers eeprom tool to investigate. looks like i have to take it out for a bench run again.
Logged
KasperH
Hero Member
*****

Karma: +24/-8
Offline Offline

Posts: 632
« Reply #5 on: March 30, 2017, 03:30:38 AM »
If it is flash related DTC, there is obviously something wrong with your flash.
What has been modified? Smiley
Logged
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178
« Reply #6 on: March 30, 2017, 03:56:16 AM »
I read through all your posts and I think you're getting confused.  You've bought some random ECUs, flashed random files, trying to use a GIAC tune as a reference, bootmode procedure doesn't sound correct.

Buy an original ECU and get it correctly adapted and the car running.  Then read the Stage 1 community thread. 
Logged
boostaddict1989
Full Member
***

Karma: +0/-18
Offline Offline

Posts: 60
« Reply #7 on: March 30, 2017, 05:27:48 AM »
Quote from: adam- on March 30, 2017, 03:56:16 AM
I read through all your posts and I think you're getting confused.  You've bought some random ECUs, flashed random files, trying to use a GIAC tune as a reference, bootmode procedure doesn't sound correct.

Buy an original ECU and get it correctly adapted and the car running.  Then read the Stage 1 community thread. 

Yeah well a few weeks ago i never hardly touched a computer. give me a fuckin break.
Logged
jimmcgee5
Full Member
***

Karma: +7/-7
Offline Offline

Posts: 201
« Reply #8 on: March 30, 2017, 08:46:25 AM »
Quote from: boostaddict1989 on March 30, 2017, 05:27:48 AM
Yeah well a few weeks ago i never hardly touched a computer. give me a fuckin break.

you will go far on this forum  Cheesy Cheesy
Logged
IamwhoIam
Hero Member
*****

Karma: +48/-105
Offline Offline

Posts: 1054
« Reply #9 on: March 30, 2017, 09:19:49 AM »
Quote from: boostaddict1989 on March 30, 2017, 05:27:48 AM
Yeah well a few weeks ago i never hardly touched a computer. give me a fuckin break.

Well why don't you give us a fuckin break with your retarded shit and endless clueless posts? Either read up properly before fucking shit up or GTFO. Enough of your shit and bad language too.
Logged
I have no logs because I have a boost gauge (makes things easier)
boostaddict1989
Full Member
***

Karma: +0/-18
Offline Offline

Posts: 60
« Reply #10 on: March 30, 2017, 10:05:29 AM »
Quote from: IamwhoIam on March 30, 2017, 09:19:49 AM
Well why don't you give us a fuckin break with your retarded shit and endless clueless posts? Either read up properly before fucking shit up or GTFO. Enough of your shit and bad language too.

Yo dipshit,where you always so experienced? Bet at one point youve asked some pretty fucking stupid questions yourself. Beside bitch, i never said anything to you so why dont you do yourself a favor and quit suckin so much dick. fuckin asshole.
Logged
boostaddict1989
Full Member
***

Karma: +0/-18
Offline Offline

Posts: 60
« Reply #11 on: March 30, 2017, 10:07:10 AM »
Quote from: boostaddict1989 on March 30, 2017, 10:05:29 AM
Yo dipshit,where you always so experienced? Bet at one point youve asked some pretty fucking stupid questions yourself. Beside bitch, i never said anything to you so why dont you do yourself a favor and quit suckin so much dick. fuckin asshole.
besides i thought this was a forum for tuning cars. Not people getting all pissy that i wont ejaculate in their ass.
Logged
nyet
Administrator
Hero Member
*****

Karma: +604/-168
Offline Offline

Posts: 12236


WWW
« Reply #12 on: March 30, 2017, 10:10:37 AM »
Quote from: boostaddict1989 on March 30, 2017, 01:43:32 AM
Here you go. I clear them, try to start car and they come back.

Can you use VCDS to scan them so they're properly decoded?
Logged
ME7.1 tuning guide (READ FIRST)
ECUx Plot
ME7Sum checksum checker/corrrector for ME7.x

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your experience.
adam-
Hero Member
*****

Karma: +122/-33
Offline Offline

Posts: 2178
« Reply #13 on: March 30, 2017, 10:16:12 AM »
Quote from: boostaddict1989 on March 30, 2017, 05:27:48 AM
Yeah well a few weeks ago i never hardly touched a computer. give me a fuckin break.
Your language is atrocious.  I'm grassing.
Logged
boostaddict1989
Full Member
***

Karma: +0/-18
Offline Offline

Posts: 60
« Reply #14 on: March 30, 2017, 06:23:05 PM »
Quote from: nyet on March 30, 2017, 10:10:37 AM
Can you use VCDS to scan them so they're properly decoded?

VCDS-Lite Version: Release 1.2
Thursday, 30 March 2017, 18:12:14.
Control Module Part Number: 8D0 907 551 M
  Component and/or Version: 2.7l V6/5VT     G   0001
           Software Coding: 06611
            Work Shop Code: WSC 87119
                      VCID: 341B9FD31723
9 Faults Found:
18020 -  Engine Control Module Incorrectly Coded
        P1612 - 35-00 -   -
17833 - Shareware Version. To Decode all DTCs
        P1425 - 35-00 - Please Register/Activate
17880 - Shareware Version. To Decode all DTCs
        P1472 - 35-00 - Please Register/Activate
17938 -  Camshaft Timing Adjustment: Short to Ground
        P1530 - 35-00 -   -
17955 - Shareware Version. To Decode all DTCs
        P1547 - 35-00 - Please Register/Activate
17697 - Shareware Version. To Decode all DTCs
        P1289 - 35-00 - Please Register/Activate
17529 -  Oxygen (Lambda) Sensor Heating Circuit: B2 S2: Short to Ground
        P1121 - 35-00 -   -
17525 - Shareware Version. To Decode all DTCs
        P1117 - 35-00 - Please Register/Activate
17908 - Shareware Version. To Decode all DTCs
        P1500 - 35-00 - Please Register/Activate
Logged
Pages: [1] 2
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • June 30, 2024, 03:03:41 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.024 seconds with 17 queries. (Pretty URLs adds 0s, 0q)