NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Immo Off Audi TT MK1 AMU
Pages: [1]
« previous next »
Author Topic: Immo Off Audi TT MK1 AMU  (Read 6950 times)
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« on: April 03, 2017, 08:59:05 AM »
I'm not trying to beg for anything, just looking for a general insight of where I should look.
I am looking for help with an Immo off. I plan to desolder the 95040 EEPROM and read/write to it with a TL866
Doing it for two cars, one is Immo2 other is Immo3

I have a general understanding of coding, but its been a few years.
I plan on simply turning off the Immo, what information should I gather and what tools would you suggest?

I've read the stickies, i know about changing hex and something about -1/-1, but I wanted to know if there was a specific place I should look on here for my specific case?
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #1 on: April 03, 2017, 07:23:37 PM »
ok, tried to do it the soldering way with a tl866a. i have my bin, but it doesnt look like most others? i cloned it, but now the car wont start at all.
Logged
adam-
Hero Member
*****

Karma: +124/-33
Offline Offline

Posts: 2179
« Reply #2 on: April 03, 2017, 11:43:10 PM »
It's not too hard at all.  Read bin in car or on bench with 95040tool.  Adjust IMMO ON/OFF with ME7_95040.  Write back with bootmode.  Smiley

Takes around 5 minutes.
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #3 on: April 04, 2017, 06:14:18 AM »
Well, i did attach the bin in my second post. So I have that.
Problem is that its a 04 instead of an 01/02

Im doing this the soldering way as I don't have the cables for benching atm. ECU is already out of car, ive already copied the bin. I tried soldering the 95040 back in (original) but car wont even start up.
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #4 on: April 04, 2017, 06:55:00 AM »
Quote from: adam- on April 03, 2017, 11:43:10 PM
It's not too hard at all.  Read bin in car or on bench with 95040tool.  Adjust IMMO ON/OFF with ME7_95040.  Write back with bootmode.  Smiley

Takes around 5 minutes.

I have just used the ME7_95040 tool on my .bin and it can't figure out the SKU or anything. I tested the program with a bin I found on here for a similar car (almost same ECU, different ending letter) and the ME7_95040 tool worked with reading that. Any idea why my bin looks so messed up?
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #5 on: April 04, 2017, 01:22:50 PM »
Guess i'll just keep posting updates on things that I find in hopes that someone can enlighten me.

ECU is a 8N0906018T
Immo2

95040 tool doesnt seem to work with immo 2. My 12 and 22 are both 04 instead of what people are saying is 01(On)/02(Off)
It also can't read my SKC/Immo/Vin

Sooooo...
I'm going to go change that 04 into an 01 (-3) and correct my right side by adding +3
Logged
vwmaniac
Full Member
***

Karma: +8/-5
Offline Offline

Posts: 174
« Reply #6 on: April 11, 2017, 06:33:17 AM »
subtract 2 from 04 @ 12 and 22  and add 2 to the checksum @ 1e and 2e, reason there is an 04 instead of a 01 is that these ecus operate diffenently and only need communication with cluster to start, similart to the audi s4 with "no immobilizer"
Logged
azenor
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 7
« Reply #7 on: April 11, 2017, 01:05:49 PM »
Quote from: vwmaniac on April 11, 2017, 06:33:17 AM
subtract 2 from 04 @ 12 and 22  and add 2 to the checksum @ 1e and 2e, reason there is an 04 instead of a 01 is that these ecus operate diffenently and only need communication with cluster to start, similart to the audi s4 with "no immobilizer"

I ended up fixing it with the -3/+3
This was an immo 2, so 01 is off and 04 is on.

Logged
ice_sar
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 18
« Reply #8 on: July 13, 2017, 01:26:14 AM »
I have the same problem on 8N609018AT AUDI TT of AMU engine. Replacement 04 on 01 really works? Thanks
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 26, 2024, 03:38:42 PM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.021 seconds with 16 queries. (Pretty URLs adds 0.001s, 0q)