NefMoto > Technical > Cluster and Immobilizer (Moderator: ddillenger) > Can anyone find the pin code from this me9 ecu?
Pages: [1]
« previous next »
Author Topic: Can anyone find the pin code from this me9 ecu?  (Read 7393 times)
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« on: April 11, 2017, 03:59:03 PM »
07 vw gti fsi.   I have the eeprom dump from the 95160 in the ecu .  im looking to swap clusters and the factory one is dead so i cant pull the pin from it.

any help is appreciated.
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #1 on: April 12, 2017, 02:03:24 AM »
Use this tool and find the information on your own:

http://nefariousmotorsports.com/forum/index.php?topic=5833.msg54763#msg54763
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #2 on: April 12, 2017, 06:59:17 AM »
Quote from: aef on April 12, 2017, 02:03:24 AM
Use this tool and find the information on your own:

http://nefariousmotorsports.com/forum/index.php?topic=5833.msg54763#msg54763

thanks for that, but it doesnt say anywhere in the description it is capable of retrieving a pin code.
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #3 on: April 12, 2017, 11:36:27 PM »
If you didnt try the tool and used your time to write...
" it doesnt say anywhere in the description it is capable of retrieving a pin code"
...noone is able to help you.

btw: i used this tool and your file BEFORE i posted this yesterday

waste of time  Roll Eyes
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #4 on: April 13, 2017, 09:12:07 AM »
Quote from: aef on April 12, 2017, 11:36:27 PM
If you didnt try the tool and used your time to write...
" it doesnt say anywhere in the description it is capable of retrieving a pin code"
...noone is able to help you.

btw: i used this tool and your file BEFORE i posted this yesterday

waste of time  Roll Eyes

I actually used this tool. all it does it defeat the immobilizer.  Which i tested and it works as stated, but i still have immobilizer active on the dash panel. This is why I need the pin code to adapt the cluster so the immobilzer light doesnt flash.
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #5 on: April 13, 2017, 09:43:31 AM »
So I made a bit of progress.  I just tore apart the old cluster and looked for anything that resembled a serial eeprom.  Found the 24LC32AL and pulled a read from it and it appears to have the cluster info stored in it.  If this is true could I just flash this chip on the replacement cluster and be "good to go" ? assuming the hardware is identical between the 2 clusters? 

Here is the read from it.
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #6 on: April 13, 2017, 10:25:44 AM »
well It doesnt work when i flash it to other cluster.  I guess im going to just immo off the ecu and be done with it. Cry
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #7 on: April 14, 2017, 02:18:23 AM »
In the tool is a button "edit inventory" and there is a field "security access code" and its 53288.
If im not totally wrong, this is your login code!
Logged
coreyj03
Full Member
***

Karma: +10/-5
Offline Offline

Posts: 173
« Reply #8 on: April 14, 2017, 01:48:04 PM »
Quote from: aef on April 14, 2017, 02:18:23 AM
In the tool is a button "edit inventory" and there is a field "security access code" and its 53288.
If im not totally wrong, this is your login code!

might be good to add this to the tool  description.
Logged
aef
Hero Member
*****

Karma: +70/-46
Offline Offline

Posts: 1601
« Reply #9 on: April 15, 2017, 01:00:05 AM »
might be good to use the tool AND all the buttons instead of reading release notes  Grin
Logged
phrozendub
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #10 on: April 16, 2017, 12:07:52 AM »
Cluster swap:

Old pin
Old mac
Old cs
Old vin
Old immo id
Pwr class <- what triggers immo active most likely.

Must all match ecu

Use the pin afterwards to adapt keys.
Logged
phrozendub
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5
« Reply #11 on: May 05, 2017, 05:26:34 PM »
med9.1 would require bdm read not eeprom read.

The cluster eeprom is encrypted.
« Last Edit: May 05, 2017, 05:28:33 PM by phrozendub » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Navigation
Personal Tools
  • November 30, 2024, 02:20:25 AM
  • Welcome, Guest. Please login or register.
    Did you miss your activation email?

    Login with username, password and session length
Search
 
Advanced Search
About Disclaimer
All Rights Reserved 2010 Nefarious Motosports
Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0.001s, 0q)