Pages: 1 [2]
Author Topic: [SOLVED] Tip-in knock/detonation  (Read 11197 times)
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #15 on: April 27, 2017, 05:42:13 AM »

I will search and log those variables.
Can you tell me please what should I search for in FR to find info regarding pre-emptive retard?
Logged
contrast
Full Member
***

Karma: +20/-2
Offline Offline

Posts: 215


« Reply #16 on: June 28, 2017, 10:06:28 PM »

Hi all

Just to bump this thread and maybe help someone facing similar problem.
I have fixed the issue now. Volvo S60R has two CVVT camshafts. There is allowed adaptation range for mechanical and installation tolerances. This adaptation was -6.xx degrees for exhaust and -9.xx degrees for intake. Both should be zero ideally, but impossible to achieve. ECU should trigger a fault if deviation is larger than +-8 degrees. IDK why it didn't.

Anyway, turned my cams a little and reset the timing. Both cams are -1.xx degrees and a positive side effect is that engine has a lot more torque and feel much more responsive. I always thought it was warm weather why it felt so slow this year. Actually it was wrong camshaft timing.

Thanks to all for thinking along!
Logged
Pages: 1 [2]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.019 seconds with 17 queries. (Pretty URLs adds 0s, 0q)