Pages: [1]
Author Topic: Flashing over apr tune  (Read 3193 times)
Harper84
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« on: April 26, 2017, 08:40:45 AM »

My s4 has an apr 93 octane tune. It's. 2001.5 car. I'm assuming it does not have a chip soldered in? Can I reflash the ecu without any issues as long as I don't try to read the ecu? I have an eBay cable with the ftf232 chip.
Also can I use the me7 logger on the apr tune or will that cause me problems?

I'm hoping to avoid having to buy another m box. The previous owner lied to me about a whole list of things with the car so I'm dealing with wiring repairs and some maintenance repairs now.

I do have the nefmoto community stage 2 tune on my laptop
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #1 on: April 26, 2017, 08:43:35 AM »

My s4 has an apr 93 octane tune. It's. 2001.5 car. I'm assuming it does not have a chip soldered in?

Open it and look

Quote
Can I reflash the ecu without any issues

If there is no riser, if nefmoto flasher doesn't work, you can always bootmode.

If you do not have a riser, recommend boot mode reading the current flash before doing anything else.

If you do have a riser, you will need another ECU or you'll need to replace the riser with a new flash (preferably blank or preprogrammed with stock).

Quote
Also can I use the me7 logger on the apr tune or will that cause me problems?

Yes.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Harper84
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 15


« Reply #2 on: April 26, 2017, 09:23:36 AM »

What are you referring to as a riser? A soldered in chip?

Will I be able to use boot mode with my eBay ftf232 cable or do I need the galleto cable
Logged
nyet
Administrator
Hero Member
*****

Karma: +607/-168
Offline Offline

Posts: 12268


WWW
« Reply #3 on: April 26, 2017, 10:29:06 AM »

What are you referring to as a riser? A soldered in chip?
If you open the ECU it will be immediately obvious if you have a riser board or not

Quote
Will I be able to use boot mode with my eBay ftf232 cable or do I need the galleto cable

You will have to hack the galletto exe to have the serial # of your ebay cable.
Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.014 seconds with 16 queries. (Pretty URLs adds 0s, 0q)