Portable ME7 logging project

Pages: 1 [2]

« previous next »

Author

Topic: Portable ME7 logging project (Read 33603 times)

elRey

Hero Member

Karma: +32/-1
Offline

Offline

Posts: 565

	Re: Portable ME7 logging project « Reply #15 on: May 03, 2017, 05:42:30 PM »

C also can run on ESP32 another alternative to RPi Zero W.


	Logged

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #16 on: November 30, 2018, 02:44:39 PM »

OK... I've spent the past few months exhaustively reverse engineering and working out how everything works.

I don't really know how far people have got before on this because most of this effort goes on behind closed doors and then is rarely shared.

I've even written my own custom Siemens C16x/ST10 Disassembler in C which an earlier stripped down version of is included in the github repo's for my Swiss Army Knife tool. The way I wrote the tool I discovered to my surprise it seems to 'just work' on even 1Mb roms from the Ferrari F430 and Maserati 4200's for all the checksumming functionality. Tested and works right out of the box. I'm guessing it works on many others too. Finds 60 odd checksum regions on the bigger 1Mb files!

Anyway I've now identified majority of the functions and labelled over 6,200 variables and maps in my ME7.3 Ferrari 360 ROM. That includes internal ram and external ram region variables as well as values, value blocks, strings, maps, fixed maps, group maps, curves, fixed curves and group curves. So you could say my disassembly is about as complete a job as anyone else I know has done or disclosed...

For the test case rom I generated this on;

*This* rom file below..
https://github.com/360trev/ME7RomTool_Ferrari/raw/master/Release/LEFT_Eddie_2004_360Spider_EU.bin

(which maps directly back to the Ferrari 360 which maps back to FRE07E0.PDF function and datasheet on here somewhere) you get the following;

// EXTERNAL MEM 0x38xxxx range: Num of entries = 2903
// INTERNAL RAM 0xExxx-0xFxxx range: Num of entries = 274

// EXTERNAL FLASH (Values) range: Num of entries = 1843
// EXTERNAL FLASH (Value_Blocks) range: Num of entries = 682
// EXTERNAL FLASH (Group_Curve) range: Num of entries = 136
// EXTERNAL FLASH (Curve) range: Num of entries = 188
// EXTERNAL FLASH (Group_map) range: Num of entries = 91
// EXTERNAL FLASH (maps) range: Num of entries = 78
// EXTERNAL FLASH (fixed_curve) range: Num of entries = 19
// EXTERNAL FLASH (fixed_maps) range: Num of entries = 3
// EXTERNAL FLASH (strings) range: Num of entries = 6

This can also generate the IDC script for IDA Pro to import the lot of this back into IDA.. (not included in this tool I just built but if anyone is interested let me know)...

With a bit more work I could probably derive a hundred or so remaining internal variables then its fully complete...

I've also written a tool to allow you to search for all variables referenced by main functions, e.g. GGPED, GGKS, GGHFM, PROKON (refer to Functional datasheet for more..).. So you give it the function and it tells you all of the internal ram variables used, the external ram variables used, maps referenced and all the addresses. You get the picture... It uses wildcards so you can do stuff like *GG* and find everything GG related which yield a huge list..

E.g.
$ me7vars.exe *GGHFM*
1) addr=0x0000f970 name="mlhfma_w" (;s)
2) addr=0x00381e1a name="mlhfmm_w" (;s)
3) addr=0x0000f97b name="rl" (;s)
4) addr=0x00380b32 name="wdkba" (;s)
5) addr=0x00810afb name="KFKHFM" (;s)
6) addr=0x00380b52 name="fkhfm" (;s)
7) addr=0x00810e83 name="KFPUSU" (;s)
Cool

addr=0x00818596 name="PUKANS" (;s)
9) addr=0x00810cbf name="KFPU2SU" (;s)
10) addr=0x00810da1 name="KFPU3SU" (;s)
11) addr=0x00810bdd name="KFPU" (;s)
12) addr=0x00380b53 name="fpuk" (;s)
13) addr=0x0000f86c name="nmot" (;s)
14) addr=0x00380bba name="tans" (;s)
15) addr=0x0000f972 name="mshfm_w" (;s)
16) addr=0x00380b54 name="nmotkor" (;s)
17) addr=0x00814300 name="MLHFM" (;s)
18) addr=0x00814700 name="MLOFS" (;s)
19) addr=0x00380f60 name="uhfm_w" (;s)
20) addr=0x00380b6e name="sumode" (;s)

// Total defines: 6223
Free table..

I'm not yet ready to release this source-code to the generator just yet as I haven't got it working generically enough yet (great on Ferrari 360 rom's but I need more work to clean it up) but I absolutely plan to. The question I have is what format do you want me to generate this is and is there a spec I can follow (or examples at least)...

Already this tool is useful.. here is a link just for the Window Command Line executable..
https://drive.google.com/open?id=1tkoeN3hg0sUu-Z4Qa6gA5V1_gXo1DZ3t

Source will be released in good time...

Any feedback for options let me know.. Its been *invaluable* for working my way around the ROM as my disassembler can reference variables and functions rather than just absolute addresses you'd normally get..

Next step on the disassembler front is to map this to auto generate C style syntax code which will speed up conversion back to even more...


	Logged

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #17 on: November 30, 2018, 02:53:21 PM »

Part 1...

ACIFI Output for cylinder-individual injection
ADVE Activation of the DV-E by means of the DLR
AEKP EKP control
AES Overview calculation of injection time
AEVAB Output injection valve cut off
AEVABU Output injection-valve cut-off by monitoring functions (EGAS)
AEVABZK Output injection-valve cut-off %MDRED + total shutdown by monitioring functions
AK Overview Emission reduction / catalyst
ALE Detection of engine stop position
ARMD Torque based anti jerk function
AS Output signal adaption
ASCETBLK Description of ASCET block library
ASCETSDB ASCET-SD descripton of block library
ATEV Purge valve drive (duty cycle)
ATM Exhaust temperature model
ATWAL Output engine temperature warning lamps
AZUE Output ignition
BBBO Start operating range with fuel in oil
BBGANG Detection of actual gear
BBKHZ Control of catalyst heating
BBSAWE Conditions for fuel cut-off / cut-in
BBSTT Condition Engine start
BBTEGA Operating contitions for purge canister control / fuel adaption
BGAGR Correction air charge calculation by exhaust gas recirculation
BGBSZ Calculated Variable Operating Track Counter
BGDVE Values for DV-E control from the learning and checking routines
BGEVAB Calculation of the actual reduction stage by ignition-valve cut-off
BGKMST Calculation of odometer value (Km)
BGKV Calculation variable consumed fuel
BGLBZ Calculated charge deficit of the battery
BGMSABG Calculation of exhaust emission mass fiow - bank-dependent
BGMSZS Calculation of mass fiows into intake manifold
BGNG Calculated variable: engine-speed gradient
BGNMOT Calculated variable: engine speed
BGPU Calculation value ambient pressure
BGRLG RL-GRADIENT
BGRLP Calculation variable rlp: predicted air charge
BGRML Calculation Value of Relative Air Mass according to SAE J1979 Mode $01 + $02 PID
BGSRM Model of intake manif. for calc. relative air charge and intake manif. pressure
BGTABST Calculated variable: cut-off time
BGTEMPK Calculation of temperature compensation for intake manifold model
BGTEV Calculation variable, mass fiow TEV
BGWDKM Calculation of throttle angle model
BGWPFGR Calculation variable, back-calculated pedal value for FGR
CAN CAN signal list
D2CTR Diagnosis; system verification counter
DCAS Diagnosis CAN timeout ASC interface
DCDACC Diagnosis; access to tester data
DCINS Diagnostics; CAN timeout instrument (Combi)
DCKUP Diagnosis; CAN-Timeout interface electronic clutch control (KUP)
DDCY OBDII; fulfillment condition 'driving cycle'
DDG Diagnosis: engine speed sensor
DDST Diagnosis of tank pressure sensor
DDVE Diagnosis: EGAS-Actuator DV-E
DECJ Diagnosis; Power stage CJ9x
DEGFE Diagnosis of input variables for charge detection
DEKON Configuration of power stage diagnosis
DEKPE Diagnosis; power stage of fuel pump relay
DEPCL Diagnosis; electronic powertrain control lamp
DEVE Diagnosis; power stage of injector valve
DFFT Diagnostics; Freeze frame selection table
DFFTCNV Diagnosis; freeze frame table, conversion to bytes
DFFTK Diagnosis; customer-specific list for selection of freeze-frame values
DFPM OBDII; Fault path manager
DFPMEEP Diagnosic; Fault Path Manager, EEPROM storage
DFPMPWF Diagnosis fault path management; detection of powerfail
DFRZ OBDII; description 'freeze frame'
DHFM Diagnosis; plausibility test hot film air fiow sensor
DHLSHK Diagnosis: sensor heating downstream of catalytic converter
DHLSVK Diagnosis sensor heating upstream catalyst
DHLSVKE
DIMC OBDII; inspection/maintenance-ready
DKAT Diagnosis; catalyst conversion
DKOSE Diagnosis of power stage for AC compressor
DKRNT Diagnosis; Knock-control, zero-test (OBDII)
DKRS Diagnosis; knock sensor
DKRTP Diagnosis of knock control, test pulse for OBDII
DKVS Diagnosis; plausibility test fuel supply system
DLLR Diagnosis: idle speed control, recognising a blocked actuator
DLSA Lambda sensor aging monitoring
DLSAHK Ageing monitoring for lambda sensor downstream of catalytic converter
DLSH Diagnosis; Readiness for operation of sensor downstream catalyst
DLSSA Signal output from lambda sensors
DLSV Diagnosis; Readiness for operation of sensor upstream catalyst
DMDDLU Diagnostic routine Misfire Detection, forming the diff. for irregular running
DMDFON Diagnosis Misfire Detection fuel-on Adaptation
DMDLAD Logic and Delay; Logical operation,different blocks for misfire detection
DMDLU Diagnostic routine misfire detection: Irregular running
DMDLUA Diagnostic routine Misfire Detection irregular running spacing
DMDMIL Fault treatment of misfire detection, control on MIL and rectification
DMDSTP Diagnostic of misfire detection : Stop conditions
DMDTSB Diagnosis misfire detection by segment time formation
DMDUE Diagnostic routine misfire detection Overview
DMIL OBDII; MIL control
DMILE OBDII; MIL-power stage
DMLSE Diagnosis; power stage check of electric cooling fan
DMS Diagnosis; permanent data aquisition (serial)
DNWKW Diagnosis alignment between camshaft and crankshaft
DNWS Diagnosis camshaft control
DNWSE Diagnosis; camshaft control power stage
DPH Diagnosis; plausibility test phase sensor
DSUE Diagnosis; driver for intake manifold fiap
DSWEC Bumpy road detection from wheel acceleration, -> via CAN from ABS CU
DTEV Diagnosis; canister purge valve (OBDII)
DTEVE Diagnosis; power stage of canister purge valve
DTIP OBDII; tester interface package
DTOP Diagnosis; operating time
DTRIG OBDII; Selectable trigger for fault path management
DUF Diagnostic interface of the function monitoring
DUR Diagnosis from computer monitoring
DVEUE Overview of DV-E-control
DVFZ Diagnosis; plausibility test vehicle speed
DVKUP Diagnosis; Switch-off engine by electronic clutch control (KUP)
DWUC OBDII; fulfillment condition 'warm up cycle'
EEPROM EEPROM treatment
EG Input variables including diagnostics for these
EGAG General inputs
EGAK Input values of exhaust value of catalyst
EGEG Input variable E-GAS
EGFE Input variables for charging detection
EGKE Input variables for knocking detection
EGNWE Input values rotational speed- and angle detection
EGTE Input variables for recording the temperature
ESGRU Basic function injection
ESNSWL Injection during afterstart and warm-up
ESSTT Injection duration at start
ESUK Injection: transient compensation
ESUKA Wall wetting adaptation based on ZPR
ESVST Fuel injection pre-control
ESVW Injection : calculation of injection angle
ESWE Injection, resumption of overrun fuel cut-off
FE Charging interventions
FGRABED Shutdown conditions, vehicle-speed controller
FGRBESI Operating signals, vehicle-speed controller
FGRFULO Function logic, vehicle-speed controller
FGRREGL Control algorithm, vehicle-speed controller
FGRUE Overview of vehicle-speed controller
FUEDK Charge control (calculation of nominal throttle-valve angle)
FUEDKSA Infiuence of air charge by throttle blade, processing throttle-valve angle
FUEREG Charge controller
GGDPG Input Signals: engine speed and phase sensor
GGDST Pickup tank pressure sensor
GGDVE Sensor variables for throttle-valve actuator
GGEGAS Sensor variable for brake and clutch switches
GGFGRH Sensor Signals Cruise Control Lever
GGFST Sensor variable tank level
GGHFM Sensor signal, hot-film air-mass meter
GGKS Sensor signal for knocking detection
GGLSH Sensor variable for lambda sensor downstream of catalytic converter
GGLSV Sensor signal lambda upstream catalyst


	Logged

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #18 on: November 30, 2018, 02:54:49 PM »

GGPED Sensor variable for accelerator pedal
GGPOEL Sensor signal oil pressure sensor, incl. diagnosis
GGTFA Diagnosis; intake air temperature sensor
GGTFM Signal engine temperature sensor
GGUB Sensor variable for battery voltage incl. diagnosis
GGVFZG Input signal: vehicle speed
GK Mixture control
GKEB Operating condition mixture control overview
GKRA Mixture control and adaptive pilot control
HLS Lambda sensor heater
KHMD Calculation of torque reserve for heating catalytic converter
KOEVAB Coordination of injection valve cutoff
KOS Control of A/C compressor
KRDY Knock control for load dynamics
KRKE Knocking detection
KRRA Adaptive knock control
KVA Output signal: display of fuel consumption
LAKH Lambda coordination for catalyst heating
LAMBTS Lambda component protection
LAMFAW Lambda vehicle-operator demand
LAMKO Lambda coordination
LAMSOLL Lambda setpoint input
LFS Engine cooling fan control
LLRBB Operating conditions of idle speed control
LLRMD Torque-based idle-speed control
LLRMR Torque reserve for idle speed control
LLRNFA
LLRNS Idle control; Nominal engine speed for idle speed control
LLRRM Idle speed control: torque controller
LR Lambda closed loop control
LRA Lambda closed loop control; Adaptive pilot control
LRAEB Conditions adaptive pilot control
LREB Activation conditions for lambda closed loop control
LRHK Lambda closed loop control downstream catalyst (OBDII)
LRINI Coordination initializing lambda controller
LRKA Two Sensor Lambda Control: Oxygen Clear Out Function
MDAUTG Calculation of torque actual value for gear control
MDBAS Basic calculation for torque interface
MDBGRG Torque limitation mimimum
MDFAW Calculation of vehicle-operator demand
MDFUE Nominal-value input from nominal torque for airmass
MDIST Engine torque calculation
MDKOG Coordination torque intervention
MDKOL Coordination torque intervention air path
MDMAX Calculation maximum torque
MDMIN Minimum engine torque coordination
MDNSTAB Torque: engine-speed stabilization
MDRED Calculation reduction step from torque demand
MDTRIP Calculation of torque reserve for short trip
MDVER Loss in engine torque
MDVERAD Adaptation of torque loss
MDVERB Torque demand by auxiliary systems (e.g. air conditioner, misc. consumers)
MDWAN Torque of the AT-converter
MDZUL Calculation of maximum permitted set torque
MDZW Calculation of torque in nominal ignition timing
MOTAUS Engine switch-off
MSF Engine control functions
NLDG Limp-home for defective engine speed sensor
NLPH Limp-home for phase synchronization
NMAXMD Torque calculation during maximum speed control
NWS Camshaft control
PROKON Project configurations
RDE Detection of reverse rotation
RKTI Calculation of injection time ti from relative fuel mass rk
RSTMON Reset monitor
SCATT SCAN TOOL-tester interface
SREAKT EGAS: safety concept, failure reactions
STADAP Starting fuel adaptation
STECK Plug pin arrangement
SU Intake manifold switch-over
TC1MOD Tester communication CARB; Mode 1
TC2MOD Tester communication CARB; Mode 2
TC5MOD Tester communikation CARB; Mode 5
TC6MOD Tester communikation CARB; Mode 6
TC8MOD Tester communikation CARB; Mode 8
TC9MOD Tester communication CARB; Mode 9, Request vehicle information
TCKOMUE Tester communication CARB; Communication structure overview
TCSORT Tester communicstion CARB; sort function
TEB Purge canister function
TEBEB Switch-on conditions for purge control
TN Output of engine speed signal
UFEING ETS monitoring concept: Input signal transfer used in function monitoring
UFFGRC ETS monitoring concept: Monitoring of Cruise Control of function monitoring
UFFGRE ETS monitoring concept: CC input information used in function monitoring
UFMER ETS monitoring concept:
UFMET ETS monitoring concept:
UFMIST ETS monitoring concept: Calculation of the actual torque in UF
UFMSRC ETS monitoring concept: MSR intervention surveillance for function monitoring
UFMVER ETS monitoring concept: Torque comparison of function monitoring
UFMZF ETS monitoring concept: Torque filter for function monitoring
UFMZUL ETS monitoring concept: Calculation of permissible torque in UF
UFNC ETS monitoring concept: Monitoring of engine speed for function monitoring
UFNSC ETS monitoring concept: Afterstart monitoring for function monitoring
UFOBP ETS monitoring concept: OBP operation of function monitoring
UFREAC ETS monitoring concept: Monitoring of fault reaction of function monitoring
UFRLC ETS monitoring concept: Monitoring of load signal for function monitoring
UFSGSC EGAS-monitoring concept: SGS-intervention-monitoring for the function overview
UFSPSC ETS monitoring concept: Monitoring of accelerator pedal value for function m.
UFUE ETS monitoring concept: function monitoring overview
UFZWC ETS monitoring concept: Monitoring of ignition angle for function monitoring
UMAUSC ETS monitoring concept: test of the shut-down path of the monitoring module
UMFPW ETS monitoring concept: fiash programming request in the monitoring module (UM)
UMFSEL ETS monitoring concept: inquiry selection in the monitoring module(UM)
UMKOM ETS monitoring concept: Inquiry/response communication between UM/FR
UMTOUT ETS monitoring concept: time-out for UM/FR-communication
URADCC ETS monitoring concept: test of the AD-converter
URCPU ETS monitoring concept: Instruction test by means of level 2'
URMEM ETS monitoring concept: cyclic memory test
URPAK ETS monitoring concept: program fiow check
URRAM ETS monitoring concept: RAM-test
URROM ETS monitoring concept: ROM-test
VMAXMD Torque request of Vmax regulation
WANWKW Angle adaptation of alignment between camshaft and crankshaft
WDKSOM Calculation of desired throttle angle without torque structure
ZUE Basic function - ignition
ZUESZ Ignition, calculation of coil closing time
ZWGRU Basic ignition angle
ZWMIN Calculation of maximum retarded spark limitation
ZWSTT Igniton at start
ZWWL Ignition during warm-up


	Logged

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #19 on: November 30, 2018, 02:59:12 PM »

That's the functions you can search for variables in so far...

E.g.

$ me7vars.exe ZUE

1) addr=0x00811ce6 name="WMNDOPZ" (;s)
2) addr=0x00811ce7 name="ZWAPPL" (;s)
3) addr=0x00811ce5 name="NACHANZ" (;s)
4) addr=0x0081986e name="WPHN" (;s)
5) addr=0x00380d14 name="wphg" (;s)
6) addr=0x00380d15 name="zwbasar_0_A" (;s)
7) addr=0x00380d16 name="zwbasar_1_A" (;s)
Cool

addr=0x00380d17 name="zwbasar_2_A" (;s)
9) addr=0x00380d18 name="zwbasar_3_A" (;s)

Discovers ZUE(), the Basic function of ignition uses 5 variables for logging out of ram (0x380dXX) and 4 in map region of flash...


	Logged

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #20 on: November 30, 2018, 03:00:31 PM »

Obviously becomes more useful when its not hardcoded to the one firmware but you get the idea..


	Logged

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #21 on: November 30, 2018, 03:07:44 PM »

And with this many variables defined even the C167 assembly is VERY readable.. e.g..

Code:

GGHFM_Func:                             ; ...
                mov     [-r0], r9
                movbz   r9, nmot        ; nmot : Motordrehzahl [BGNMOT ACIFI ADVE AEVABU AGK ARMD ATEV ATM BBFGR BBSAWE BBSTT BGAGR BGMSZS BGPU BGTABST BGTEMPK BGTEV DECJ DFFT DFFTK DFPM DKATLRS DKRNT DKRS DLSU DMDDLU DMDFON DMDLU DMDLUA DMDMIL DMDSTP DMDUE DNWS DTKAT DVFZ ESGRU ESNST ESSTT ESUK ESUKAS ESVW ESWL F1MD FUEDK FUEREG GGDPG GGDVE GGHFM GGKS GGLSU GGPED GK KOS KRDY KRKE KRRA KWP2000F KWPIOC LAKH LAMBTS LAMFAW LLRBB LLRNS LLRRM LRA LRAEB LRS LRSEB LRSHK LRSKA MDBAS MDFUE MDKOL MDMAX MDVERB MDZUL NWS PROKON RKTI RUNTIME SLS SSTB STADAP SU TEB UFNC VMAXMD WANWKW WFS ZUE ZUESZ ZWGRU ZWMIN ZWSTT ZWWL]
                movbz   r4, puans
                mulu    r9, r4
                mov     r9, MDL
                cmp     r9, #7FFFh
                jmpr    cc_ULE, get_nmotkor
                movb    nmotkor, ONES   ; nmotkor : Motordrehzahl ansaugluftkorrigiert (zur Pulsationskorrektur) [GGHFM]
                jmpr    cc_UC, check_sumode
; ---------------------------------------------------------------------------
get_nmotkor:                            ; ...
                mov     r4, r9
                shr     r4, #7
                movb    nmotkor, rl4    ; nmotkor : Motordrehzahl ansaugluftkorrigiert (zur Pulsationskorrektur) [GGHFM]
check_sumode:                           ; ...
                movb    rl4, sumode     ; sumode : Zustand der Saugrohrumschaltung [SU BGSRM GGHFM KWPDATR]
                cmpb    rl4, #1
                jmpr    cc_Z, sumode_1
                cmpb    rl4, #2
                jmpr    cc_Z, sumode_2
                cmpb    rl4, #3
                jmpr    cc_Z, sumode_3
                jmpr    cc_UC, other_mode
; ---------------------------------------------------------------------------
sumode_1:                               ; ...
                mov     r12, #KFPUSU    ; KFPUSU : Pulsationskennfeld bei aktiver Saugrohrumschaltung sumode=1 [GGHFM]
                movbz   r13, nmotkor    ; nmotkor : Motordrehzahl ansaugluftkorrigiert (zur Pulsationskorrektur) [GGHFM]
                movbz   r14, wdkba      ; wdkba : Drosselklappenwinkel bezogen auf unteren Anschlag [GGDVE BGPU BGTEV CAN DFFT GGHFM LRAEB RUNTIME SSTB TC1MOD TEB]
                calls   0, Lookup_2D_Byte_table ; 2D Lookup Byte Arguments usually Fuel related
                                        ;
                                        ; r12= Map address, 1st byte width, 2nd byte height
                                        ; r13= Y
                                        ; r14= X
                movb    fpuk, rl4       ; fpuk : HFM-Korrekturfaktor im Pulsationsbereich [GGHFM]
                jmpr    cc_UC, do_kfkhfm_lookup
; ---------------------------------------------------------------------------
sumode_2:                               ; ...
                mov     r12, #KFPU2SU   ; KFPU2SU : Pulsationskennfeld bei aktiver Saugrohrumschaltung sumode=2 [GGHFM]
                movbz   r13, nmotkor    ; nmotkor : Motordrehzahl ansaugluftkorrigiert (zur Pulsationskorrektur) [GGHFM]
                movbz   r14, wdkba      ; wdkba : Drosselklappenwinkel bezogen auf unteren Anschlag [GGDVE BGPU BGTEV CAN DFFT GGHFM LRAEB RUNTIME SSTB TC1MOD TEB]
                calls   0, Lookup_2D_Byte_table ; 2D Lookup Byte Arguments usually Fuel related
                                        ;
                                        ; r12= Map address, 1st byte width, 2nd byte height
                                        ; r13= Y
                                        ; r14= X
                movb    fpuk, rl4       ; fpuk : HFM-Korrekturfaktor im Pulsationsbereich [GGHFM]
                jmpr    cc_UC, do_kfkhfm_lookup
; ---------------------------------------------------------------------------
sumode_3:                               ; ...
                mov     r12, #KFPU3SU   ; KFPU3SU : Pulsationskennfeld bei aktiver Saugrohrumschaltung sumode=3 [GGHFM]
                movbz   r13, nmotkor    ; nmotkor : Motordrehzahl ansaugluftkorrigiert (zur Pulsationskorrektur) [GGHFM]
                movbz   r14, wdkba      ; wdkba : Drosselklappenwinkel bezogen auf unteren Anschlag [GGDVE BGPU BGTEV CAN DFFT GGHFM LRAEB RUNTIME SSTB TC1MOD TEB]
                calls   0, Lookup_2D_Byte_table ; 2D Lookup Byte Arguments usually Fuel related
                                        ;
                                        ; r12= Map address, 1st byte width, 2nd byte height
                                        ; r13= Y
                                        ; r14= X
                movb    fpuk, rl4       ; fpuk : HFM-Korrekturfaktor im Pulsationsbereich [GGHFM]
                jmpr    cc_UC, do_kfkhfm_lookup
; ---------------------------------------------------------------------------
other_mode:                             ; ...
                mov     r12, #KFPU      ; KFPU : Pulsations - Kennfeld [GGHFM]
                movbz   r13, nmotkor    ; nmotkor : Motordrehzahl ansaugluftkorrigiert (zur Pulsationskorrektur) [GGHFM]
                movbz   r14, wdkba      ; wdkba : Drosselklappenwinkel bezogen auf unteren Anschlag [GGDVE BGPU BGTEV CAN DFFT GGHFM LRAEB RUNTIME SSTB TC1MOD TEB]
                calls   0, Lookup_2D_Byte_table ; 2D Lookup Byte Arguments usually Fuel related
                                        ;
                                        ; r12= Map address, 1st byte width, 2nd byte height
                                        ; r13= Y
                                        ; r14= X
                movb    fpuk, rl4       ; fpuk : HFM-Korrekturfaktor im Pulsationsbereich [GGHFM]
do_kfkhfm_lookup:                       ; ...
                mov     r12, #KFKHFM    ; KFKHFM : Korrekturkennfeld fnr HFM [GGHFM]
                movbz   r13, nmot       ; nmot : Motordrehzahl [BGNMOT ACIFI ADVE AEVABU AGK ARMD ATEV ATM BBFGR BBSAWE BBSTT BGAGR BGMSZS BGPU BGTABST BGTEMPK BGTEV DECJ DFFT DFFTK DFPM DKATLRS DKRNT DKRS DLSU DMDDLU DMDFON DMDLU DMDLUA DMDMIL DMDSTP DMDUE DNWS DTKAT DVFZ ESGRU ESNST ESSTT ESUK ESUKAS ESVW ESWL F1MD FUEDK FUEREG GGDPG GGDVE GGHFM GGKS GGLSU GGPED GK KOS KRDY KRKE KRRA KWP2000F KWPIOC LAKH LAMBTS LAMFAW LLRBB LLRNS LLRRM LRA LRAEB LRS LRSEB LRSHK LRSKA MDBAS MDFUE MDKOL MDMAX MDVERB MDZUL NWS PROKON RKTI RUNTIME SLS SSTB STADAP SU TEB UFNC VMAXMD WANWKW WFS ZUE ZUESZ ZWGRU ZWMIN ZWSTT ZWWL]
                movbz   r14, rl         ; rl : relative Luftfnllung [BGSRM ATM BGAGR BGTEMPK DFFT DKATLRS DLLR DLSU DMDDLU DMDFON DMDLU DMDLUA DMDMIL DMDSTP DTESK DTKAT ESGRU ESNST ESUKAS ESVW ESWL GGDVE GGHFM GGKS GGLSU GK KRDY KRRA LAKH LAMBTS LLRNS LRA LRS LRSEB LRSHK NMAXMD NWS RUNTIME SLS SSTB TEB UFRLC ZWGRU ZWMIN ZWWL]
                calls   0, Lookup_2D_Byte_table ; 2D Lookup Byte Arguments usually Fuel related
                                        ;
                                        ; r12= Map address, 1st byte width, 2nd byte height
                                        ; r13= Y
                                        ; r14= X
                movb    fkhfm, rl4      ; fkhfm : HFM-Korrekturfaktor [GGHFM]
                movbz   r4, fpuk        ; fpuk : HFM-Korrekturfaktor im Pulsationsbereich [GGHFM]
                movbz   r5, fkhfm       ; fkhfm : HFM-Korrekturfaktor [GGHFM]
                mul     r4, r5
                mov     restore_MDL, MDL
                mov     r4, MDL
                mov     r9, [r0+]
                rets


	Logged

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #22 on: November 30, 2018, 03:16:12 PM »

One last example before I pack up for the night Grin

$ me7vars.exe PROKON
1) addr=0x00818190 name="CDHSVSA" (;s
2) addr=0x00810003 name="CDAGRL" (;s)
3) addr=0x00810008 name="CDHSHE" (;s)
4) addr=0x0081000a name="CDHSVE" (;s)
5) addr=0x00810002 name="CDAGR" (;s)
6) addr=0x00810004 name="CDATR" (;s)
7) addr=0x00810005 name="CDATS" (;s)
Cool

addr=0x00810006 name="CDDST" (;s)
9) addr=0x00810007 name="CDHSH" (;s)
10) addr=0x00810009 name="CDHSV" (;s)
11) addr=0x0081000d name="CDLASH" (;s)
12) addr=0x0081000e name="CDLATP" (;s)
13) addr=0x0081000f name="CDLATV" (;s)
14) addr=0x0081000b name="CDKAT" (;s)
15) addr=0x0081000c name="CDKVS" (;s)
16) addr=0x00810010 name="CDLDP" (;s)
17) addr=0x00810011 name="CDLLR" (;s)
18) addr=0x00810012 name="CDLSH" (;s)
19) addr=0x00810013 name="CDLSV" (;s)
20) addr=0x00810015 name="CDNWS" (;s)
21) addr=0x00810016 name="CDSLS" (;s)
22) addr=0x00810018 name="CDSWE" (;s)
23) addr=0x0081001a name="CDTES" (;s)
24) addr=0x00810017 name="CDSLSE" (;s)
25) addr=0x00810025 name="CWUHR" (;s)
26) addr=0x0081001e name="CWKONABG" (;
27) addr=0x0081001f name="CWKONFZ1" (;
28) addr=0x0081001c name="CWERFIL" (;s
29) addr=0x00818191 name="CWTKAT" (;s)
30) addr=0x00810014 name="CDMD" (;s)
31) addr=0x00810024 name="CWTF" (;s)
32) addr=0x0081001d name="CWKLIMA" (;s
33) addr=0x00810020 name="CWKONLS" (;s
34) addr=0x00810019 name="CDTANKL" (;s
35) addr=0x00380a01 name="cw_obd" (;s)
36) addr=0x00810027 name="NSWO1" (;s)
37) addr=0x00810028 name="NSWO2" (;s)

This is function PROKON which accesses the codewords we all seem to want to mess around with. Have fun


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Portable ME7 logging project « Reply #23 on: November 30, 2018, 05:36:02 PM »

If you use .csv we can be assured to be able to convert it to anything else, including IDA scripts or ME7Logger defs...

I'm on travel so I don't have access to my desktop.. will definitely check this out when I get home..

Please consider using the 2.7t 551M as your first non ferrari test thx


	Logged

ME7.1 tuning guide
ECUx Plot
ME7Sum checksum
Trim heatmap tool

Please do not ask me for tunes. I'm here to help people make their own.

Do not PM me technical questions! Please, ask all questions on the forums! Doing so will ensure the next person with the same issue gets the opportunity to learn from your ex

360trev

Full Member

Karma: +68/-2
Offline

Offline

Posts: 235

	Re: Portable ME7 logging project « Reply #24 on: December 04, 2018, 03:07:18 AM »

Hi Nyet,

Thanks for the note. I will support CSV. I am thinking of making an integrate IDE for the disassembler to make it more user friendly. This will be specifically geared towards understanding Bosch ME firmware images. Concentrating on C16x/ST10 variants in the first instance and ofcourse could be extended to Tricore later (actually tricore is easier since much more information available on it and I have a working board and working C compilers which helps, heck there is even Arduino style tricore board I have).

Anyway, since I have close to 3,000 ram variables which could be potentially logged via K-line (using McMess) what's the most interesting ones to focus on ? .. Doing this many is surely going to confuse people. Many of them are used internally within functions for example so probably not so interesting once pulled.

On to the topic of logging.
I'd like to make a proper stand alone logger with wifi logging built in (perhaps an ESP32 controller for Wifi and Bluetooth). Its pretty simple to connect K-Line to any microcontroller (including the PC) actually..

For PC just get one of these $2 units which is nothing more than an FDTI to RS232 serial converters so you can get K-Line into USB...
https://www.ebay.co.uk/itm/5V-3-3V-USB-FT232RL-To-Serial-232-Adapter-Download-Cable-Module-For-Arduino-UK/152215744554?epid=2117884573&hash=item2370c3f02a:g:cy4AAOSwCyFbNFb6:rk:2:pf:0

And then wire the Transmit and Receive pins to a L9637D K-Line transceiver... Again $2... For microcontroller you can connect the L9637D directly to a Serial UART..
https://www.ebay.co.uk/itm/2PCS-L9637D-SOP8-ST-IC-INTERFACE-BUS-ISO-9141-8-SOIC-NEW-GOOD-QUALITY/201415108963?hash=item2ee546a963:g:FDQAAOSwVFlT2wW1:rk:2:pf:0

With the other end going to your K-Line on your OBD port...

This project could be a good starting point as its based on a readily available STM32 embedded controller and it comes with full source-code on github and already out of the box supports K-Line and CAN.
https://serwis.avt.pl/manuals/AVT5271.pdf

However to get started instead of having to build your own board (which can come later) during prototyping its easier to get an off the shelf pre-made STM32F103 development board from China again an simply wire up the 3 pins to the L9637D K-Line converter... Volia! You can now communicate with the ECU directly, reflash it, etc. all from a stand alone board. Power can come directly from OBD port...

Had any thoughts about this? Or willing to contribute some time???


	Logged

Cadensdad14

Full Member

Karma: +8/-1
Offline

Offline

Posts: 134

	Running ME7Logger on Raspberry Pi « Reply #25 on: August 22, 2019, 07:31:48 PM »

I may be a bit too ambitious in taking on this project, as Ive read other peoples information on this and more skilled people than me seem to have come up short. None the less Ill give this a shot.

So ive made an Arduino system for my RallyCross car that captures GPS Location at 10 Hz along with elevation and speed, and then captures yaw, pitch and roll and g forces. It also is prepped for an aftermarket oil pressure sensor and suspension levels at the 4 corners of the car. I would like to blend this with a Raspberry Pi unit for logging the engine parameters, and then doing a quick analysis between runs. Id also like to be able to wirelessly offload the data from the car.

Right now i know i can use the Raspberry Pi to take care of the wireless data transfer. Im not an expert at any of this but if any one could help with some pointers, it would be greatly appreciated.

Does anyone have the source code for ME7Logger, or Nefmoto that would allow me to work out the interchange required to interface with the ECU?

Ive also shared what ive gotten working on my arduino. Need to quit printing to serial and start writing to SD. Not much, but this stuff all starts somewhere.


	Logged

aef

Hero Member

Karma: +69/-46
Offline

Offline

Posts: 1601

	Re: Running ME7Logger on Raspberry Pi « Reply #26 on: August 22, 2019, 11:45:39 PM »

seen this?

http://nefariousmotorsports.com/forum/index.php?topic=12529.0


	Logged

nyet

Administrator
Hero Member

Karma: +607/-168
Offline

Offline

Posts: 12270

	Re: Portable ME7 logging project « Reply #27 on: August 23, 2019, 08:14:51 AM »

merged


	Logged

Cadensdad14

Full Member

Karma: +8/-1
Offline

Offline

Posts: 134

	Re: Portable ME7 logging project « Reply #28 on: September 03, 2019, 08:08:16 PM »

So I found this and am hoping that this will help with just establishing communication with the ECU and getting block data. From here hopefully homing in on exact values isn't that hard.

https://www.blafusel.de/obd/obd2_kw1281.html#5


	Logged

adam-

Hero Member

Karma: +124/-33
Offline

Offline

Posts: 2179

	Re: Portable ME7 logging project « Reply #29 on: April 08, 2020, 01:12:45 PM »

Was there much progress on this? I've found a repo for me7logger in Py and it would be cool to port to Arduino. I don't think much was ever done but if it was, it would be cool to share.

I'm hoping being stuck inside helps me finish some of the coding projects I started.


	Logged

Pages: 1 [2]

« previous next »

Jump to:

Navigation

Personal Tools

November 26, 2024, 11:03:07 AM

Welcome, Guest. Please login or register.
Did you miss your activation email?

Navigation

Personal Tools

Search