Pages: [1]
Author Topic: ERCOS info  (Read 5859 times)
nihalot
Full Member
***

Karma: +41/-3
Offline Offline

Posts: 117


« on: May 11, 2017, 10:41:53 PM »


https://drive.google.com/open?id=0B6S55hndsVcLZUdwSHZvckV1eEU

Found this document detailing a lot of concepts about the ERCOS RTOS used in
I think edc15 and me7. Does someone have something more detailed? This document is more abstract and tells very little about the actual code.
It did help me understand how the tasks communicate with each other and how interrupts and semaphores are handled by the OS


Thanks and regards
« Last Edit: May 11, 2017, 11:03:10 PM by nihalot » Logged

www.tangentmotorsport.com

multimap/LC/rolling antilag for MG1/MED17/EDC17/MED9/EDC15

contact for reverse engineering services of any ECU/TCU
gman86
Hero Member
*****

Karma: +45/-128
Offline Offline

Posts: 705


« Reply #1 on: May 12, 2017, 02:47:23 AM »

0KB?
Logged
nihalot
Full Member
***

Karma: +41/-3
Offline Offline

Posts: 117


« Reply #2 on: May 12, 2017, 03:34:27 AM »

0KB?
Error uploading from phone, thats why uploaded on Drive again.

Regards
Logged

www.tangentmotorsport.com

multimap/LC/rolling antilag for MG1/MED17/EDC17/MED9/EDC15

contact for reverse engineering services of any ECU/TCU
nubcake
Sr. Member
****

Karma: +53/-4
Offline Offline

Posts: 400


« Reply #3 on: May 12, 2017, 05:43:53 AM »

Judging by the signatures (and well the internal structure itself):
Quote
ERCOSEK   V3.0.16 OAK (c)ETAS
Quote
ERCOSEK   V4.1.16 MPC56x (c)ETAS
It's also used in the EDC16 & MED9 family ECUs.

ME7 for comparison carries this signature:
Quote
ERCSU V1.1.6 SAB_C16x (c)ETAS
Logged
siado
Newbie
*

Karma: +0/-0
Offline Offline

Posts: 5


« Reply #4 on: January 04, 2023, 05:37:52 PM »

Any chance this file is still around somewhere?
Logged
jimmcgee5
Full Member
***

Karma: +7/-7
Offline Offline

Posts: 201


« Reply #5 on: January 05, 2023, 01:12:33 PM »

https://redirect.cs.umbc.edu/~younis/Real-Time/Reading_Assignments/Read_24.pdf  google is your friend  Wink
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Page created in 0.027 seconds with 16 queries. (Pretty URLs adds 0s, 0q)