Hi Guys, i've posted this here as i'm not sure where else to put it,

Basically i am incapable of Porting the Multimap Cruise routine into a BAM file so i'm doing what i feel more comfortable with, This file is running good on my K04 Car

I have changed a whole load of maps to get close to an orignal BAM file,

MAF, injectors, BOOST PID,

however i've tried to enable EGT, reversing the disable instructions but something is missing, in ME7 logger from ignition on the EGT temp is around 990*C and goes up to 1050*C as it warms up.

If someone in the know could tell me if i am wasting my time, IE does it need code patched in from another file to switch it on? if so i defo can't achieve this.

Many thanks anyway.

Mark.

Hi Adam, yes mate it is actually an S3 anyway i just want to use the cruise control switching code.

if i put a bam file on all works as it should.

Mark.