Thank you for your reply, I have read that post many times but is not 100% correct. Also I have try this with no good result, limp mode again and again.
mbox:
1b9e2 - KFMLDMN threshold for B_minflr diagnosis HFM/HLM change entire map to 0
10d69 - CWBGMSZS change from 2 to 0
1819c - CDEHFM maf code word change from 1 to 0
18802 - CWDHFM maf code word change from 0 to 1
and finally, the one map you can change alone to simply remove the illusive p0102 fault and sensor error limp but will not have cruise and esp without the other 4 changes...
10716 - CLALM maf voltage signal error class change from 3 to 1
With a 5120 setup and properly calibrated throttle maps,
